Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Warped plate on inside of door  (Read 1586 times)

jerkash

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 280
  • OWF Brand: Legend
    • View Profile
Warped plate on inside of door
« on: October 18, 2014, 02:36:05 PM »

Any of you Legend owners have a problem with the plate on the inside of the door warping?  It it the plate with holes in it for the fan to blow air into the firebox.  It is about the same size as the door
Logged

smitty33

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 36
    • View Profile
Re: Warped plate on inside of door
« Reply #1 on: October 20, 2014, 12:13:36 PM »

My plate is also warped. I have the 4135 it did it the first season. The air still blows in ok tho. I dont know if a thicker plate would have been better or not. But as for operation of the stove i see no problem. Fired mine up a couple weeks ago just to check things out. One thing i did tho this year i installed a 200 degree cut off sensor on my hot line leaving the stove. I noticed last year my aquastat did not shut off at my cut off temp one time and it got a little hot. Waiting for it too get cold enough to fire err back up.
Logged

onezero1010101

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 15
  • OWF Brand: Legend
    • View Profile
Re: Warped plate on inside of door
« Reply #2 on: November 14, 2014, 09:14:01 AM »

Mine is warped as well, and see no issues.  And mine is on its second season as well.
Logged

slimjim

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5213
  • OWF Brand: Wood Doctor / HeatMaster
  • OWF Model: 14,000. / G 200 and G 400
  • Southern Maine
    • View Profile
    • www.mainlycustom.com
Re: Warped plate on inside of door
« Reply #3 on: November 15, 2014, 03:52:21 AM »

I think it is simply a heat shield guys, Have you checked with the dealer/manufacturer
Logged
Wood boiler sales, service and installation for the Northeastern USA.