Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Saw Dust with wood mix  (Read 2179 times)

Maxnchej

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 86
  • OWF Brand: Portage and main
  • OWF Model: Bl2840
    • View Profile
Saw Dust with wood mix
« on: September 01, 2016, 07:47:40 PM »
There is a saw mill about 30 minutes away that sells large loads of saw dust mixed with limited wood scraps. I have heard from others that people buy this and put it into there wood boilers. I have a BL-2840 and was wondering if anyone has tried this. Just wondering if it is work me getting a load this winter to mix in with my wood.

Let me know your thoughts.

Thanks
Logged

mlappin

  • Fabricator Extraordinaire
  • Global Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4140
  • OWF Brand: homebuilt, now HeatmasterSS
  • OWF Model: Martin Steel Works Gen 1 then, now a G200.
  • North Liberty, Indiana
    • View Profile
    • Altheatsolutions
Re: Saw Dust with wood mix
« Reply #1 on: September 01, 2016, 08:50:44 PM »
I’d think you’d want to store the sawdust inside or make sure it stays tarped and sitting high and dry, I’ve tried to burn piles of chips from the firewood processor and if it gets wet forget it.
Logged
Stihl 023
Stihl 362
Stihl 460
Sachs Dolmar 112 and 120
Homemade skid steer mounted splitter, 30" throat, 5" cylinder
Wood-Eze model 8100 firewood processor

HeatmasterSS dealer for Northern Indiana

coolidge

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1409
    • View Profile
Re: Saw Dust with wood mix
« Reply #2 on: September 02, 2016, 03:38:32 AM »
I would think that would smoke alot
Logged
Western Maine