Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Woodmaster 4400 ETC temp high limit change  (Read 284 times)

terpjr

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 31
  • OWF Brand: Woodmaster
  • OWF Model: 4400
    • View Profile
Woodmaster 4400 ETC temp high limit change
« on: March 04, 2017, 01:46:10 PM »

Hey guys,
Need help...have scoured the web and can't find my answer.

Have a 10 year old 4400...had a small fire in an outbuilding...melted my ETC. 
Got a new one, plugged in, I am up and running.

On my old one, about 7 years ago I, finally, found online how to adjust my high limit over 180.
I know it comes factory set at 170-160.  I was experimenting with my limits and differential that my best setup was 185/175.
I found these instructions a long time ago, did it once and never thought about it again.

Now I can't find...
I seem to remember you had to go into programming mode...and from there I am drawing a blank.

Help if anyone knows.
Logged
Steve Terplak - Upstate NY
Woodmaster 4400
Husqvarna 562xp, 460 and 261
Massey Ferguson 165, 265, 1080, 40B backhoe, Landini 105 and JD 450B dozer.
Homemade 3pt hitch splitter.

slimjim

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5140
  • OWF Brand: Wood Doctor / HeatMaster
  • OWF Model: 14,000. / G 200 and G 400
  • Southern Maine
    • View Profile
    • www.mainlycustom.com
Re: Woodmaster 4400 ETC temp high limit change
« Reply #1 on: March 04, 2017, 02:29:56 PM »

I just went through their class and as good as it was, my old brain leaked and I'm going to ask if you could wait until Monday when WM helper comes in, if not, I would bet that an answer can be found
Logged
Wood boiler sales, service and installation for the Northeastern USA.

hondaracer2oo4

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1285
  • OWF Brand: Heatmaster. Past Hardy
  • OWF Model: G200. Past H4
    • View Profile
Re: Woodmaster 4400 ETC temp high limit change
« Reply #2 on: March 04, 2017, 02:43:53 PM »

http://www.woodmaster.com/wp-content/uploads/2015/05/7994-590-LT-90-Manual-v3-1-web.pdf

I know this is for their lt90 model but should be the same etc programming sequence.
Logged

terpjr

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 31
  • OWF Brand: Woodmaster
  • OWF Model: 4400
    • View Profile
Re: Woodmaster 4400 ETC temp high limit change -answer
« Reply #3 on: March 05, 2017, 06:22:20 PM »

Ok.

Answered my own question.

Found manual for temperature controller of ETC.

http://www.emersonclimate.com/europe/ProductDocuments/DixellLiterature/XR30CX-GB.pdf

Accessing Hidden MEnu
1.  Hold Down and Set for 3 seconds - degree F will blink.
2.  Hold Down and Set for 7 seconds.
3.  Pr2 will flash and then Hy.
4.  Press the set button to scroll through parameters you can change. - in this case US (upper set point).
5.  Use up and down arrow to select parameter you want and press set.  Wait until it goes back to regular menu.

Note - now all you have changed is the upper set limit, you still need to change what you have it set at (as explained in regular manual).

It appears you can set it as high as 230 degrees (this doesn't seem like a good idea...

Logged
Steve Terplak - Upstate NY
Woodmaster 4400
Husqvarna 562xp, 460 and 261
Massey Ferguson 165, 265, 1080, 40B backhoe, Landini 105 and JD 450B dozer.
Homemade 3pt hitch splitter.

slimjim

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5140
  • OWF Brand: Wood Doctor / HeatMaster
  • OWF Model: 14,000. / G 200 and G 400
  • Southern Maine
    • View Profile
    • www.mainlycustom.com
Re: Woodmaster 4400 ETC temp high limit change
« Reply #4 on: March 06, 2017, 04:17:00 AM »

I believe that if you have a high limit snap disk, it will be for 190 degrees
Logged
Wood boiler sales, service and installation for the Northeastern USA.