Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Water Level Indicator  (Read 872 times)

terpjr

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 34
  • OWF Brand: Woodmaster
  • OWF Model: 4400
    • View Profile
Water Level Indicator
« on: January 06, 2018, 10:27:06 AM »

Went out to the furnace yesterday morning and green water light was off.  I assumed I was low on water (evaporation does that) but 3 gallons had it overflowing out of the stand pipe.  Light was still off.

So, I would assume the LED had burned out but...that is not the most likely scenario...I had to replace the ETC unit last year...(had a structural in a small building near the furnace, melted the digital display of the ETC and badly deformed it)...I still have the leftover parts and once the outside temps get back above 0, I am going to replace it with the still function LED indicator from the old one...assuming that the LED still does not come on (which if it does come on, problem solved, I will call the company that I bought the ETC from and ask for a replacement since it malfunctioned after less than a year) the issue must be in the float assembly.

So my question is the actual float assembly...where on the furnace is it, how do I remove/access it, any hints/tips?  This is one part of the furnace I am not yet familiar with...

Thanks,
Steve
Logged
Steve Terplak - Upstate NY
Woodmaster 4400
Husqvarna 562xp, 460 and 261
Massey Ferguson 165, 265, 1080, 40B backhoe, Landini 105 and JD 450B dozer.
Homemade 3pt hitch splitter.