Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Pump Going Out??  (Read 1886 times)

CountryBoyJohn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 686
  • OWF Brand: Heatmaster
  • OWF Model: MF 10,000 E
    • View Profile
Pump Going Out??
« on: October 10, 2018, 07:24:02 AM »

Hey guys, I've been running a pair of chinese knockoff Grundfos pumps for now my 5th season.  I had one fail the first year, but it seized up and was obvious it was dead.  This one is starting to sound funny.  I can hear the water in the pump and it almost sounds like air bubbles in the pump.  It sounds turbulent and not smooth.  Is it about to die?  Should I replace it now?  I have a Taco ready to go.   
Logged
2013 F250 6.2L Lariat
Stihl MS290
DHT 27 Ton Log Splitter
Woodchuck Log Jack
56, 57, 58 Ferguson TO-35
Knox County, IN

RSI

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3100
  • OWF Brand: HeatMaster
  • OWF Model: G200 and B250
    • View Profile
    • RSI
Re: Pump Going Out??
« Reply #1 on: October 10, 2018, 08:45:26 AM »

I would replace it. If you take it apart I would guess you will find the ceramic bearing is worn down and the rotor is scraping on the side of the housing and wearing through the outer layer.
If that is what is happening with it, it is not likely to make it through the winter.
Logged

E Yoder

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1296
  • OWF Brand: HeatMaster
  • OWF Model: GS 100
    • View Profile
    • www.heatmasterfurnace.com
Re: Pump Going Out??
« Reply #2 on: October 11, 2018, 03:07:56 AM »

Is the actual design of the bearing different than a "name brand" pump? I've wondered but never knew for sure.
Logged
HeatMaster dealer serving southwest VA.
www.heatmasterfurnace.com