Welcome, Guest. Please login or register.
Did you miss your activation email?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
General Outdoor Furnace Discussion / Water temp stuck in the low 160's with E-2400
« on: March 20, 2018, 11:00:01 AM »
Hi All,
My Water temp stuck in the low 160's with E-2400
Very glad you are here.
I suspect that the gasket for the flap that is opened and closed by the handle is faulty.
We continue to go through the wood rather fast.
Havn't seen 170deg water for several days.
It was cycling up to 190deg.
whatdoyathink?
Thanks,
bro d
My Water temp stuck in the low 160's with E-2400
Very glad you are here.
I suspect that the gasket for the flap that is opened and closed by the handle is faulty.
We continue to go through the wood rather fast.
Havn't seen 170deg water for several days.
It was cycling up to 190deg.
whatdoyathink?
Thanks,
bro d
2
Central Boiler / CB 2400 replacement eve LED
« on: July 18, 2017, 05:50:29 PM »
Had a fire outside my 2400 and the 2ndary light (LED) was toast.
Plus the wire near the led has to be replaced also.
I consulted with an expert{?) and they claimed that the part I needed is P/N 2500144.
Got the part (kit) and it's a Classic Edge Primary Light Kit and appears to have nothing to do with a 2400.
I need to replace the 2ndary Led (other side from the control panel) and the wiring with the right part.
Any body up on thiese issues?
"preciated it
bro d
Plus the wire near the led has to be replaced also.
I consulted with an expert{?) and they claimed that the part I needed is P/N 2500144.
Got the part (kit) and it's a Classic Edge Primary Light Kit and appears to have nothing to do with a 2400.
I need to replace the 2ndary Led (other side from the control panel) and the wiring with the right part.
Any body up on thiese issues?
"preciated it
bro d
Pages: [1]