Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: flue gas monitoring data  (Read 1213 times)

tinfoilhat2020

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 634
  • OWF Brand: POS
    • View Profile
flue gas monitoring data
« on: January 17, 2018, 11:41:53 PM »

hey guys,

Just wanted to relay that after a month of tracking flue gas temperatures I have found that my average flue gas temp during full gas cycle is 330-400. I have always see a high during each cycle of 430-450. This data is all during burning cycles of dense hardwoods such as red/white oak, locust, cherry and hickory.

When burning maple and ash I found the stack temps to be a bit lower in the 300-330 range on average.

I am taking this data using a digital probe mounted in the stack as well as a Miljoco Dial Flue temp gauge (what polar stocks on their furnaces). Both temp sensors are now very close in numbers. it is nice being able to have a system between the two to check calibration. Hopefully soon enough I will have logging capabilities on the flue gas temps as well.

Just some data I thought I would pass along.

Burn on :thumbup:
Logged