Outdoor Wood Furnace Info

Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => Heatmor => Topic started by: nd guy on February 20, 2017, 07:45:14 PM

Title: Heatmor question
Post by: nd guy on February 20, 2017, 07:45:14 PM
Hi, I am looking at a used Heatmor SS OWB and the seller cannot find a model number on it. Is there a certain location for the model number? Can it be determined by the size of the firebox? It is approx. 15 yrs old and not used the last 5 years. I would like to know it's size to see if it fits my needs. Also is there any thing to look for when it comes to lack of proper use? This is my first post but I've been lurking here for months. Alot of useful info. Thanks for the help. Ray
Title: Re: Heatmor question
Post by: aarmga on February 22, 2017, 07:06:04 AM
Should have the model number on the back of he stove.  If that isn't there anymore I'd try google.  The reason I'm commenting is the age of the stove.  Even tho it is SS it can still have leaks, the older stainless models used a type of metal that didn't tolerate heat as well.  If you do happen to get this stove for very cheap (the only way I'd purchase a stove at this age) I'd make damn sure there was/is no leaks before handing the money over.  Sometimes repair work can be very "cheap" as well.  Be careful not to overlook a repair that will sell the stove but end up giving you problems in the near future.
Title: Re: Heatmor question
Post by: hrc200x on February 22, 2017, 03:25:34 PM
Believe my 4 year old 200 tag is on the inside of the main outer door. Back of the firebox to where the door closes is about 3 feet.
Title: Re: Heatmor question
Post by: nd guy on February 23, 2017, 11:11:22 PM
Thanks for the replies. Could this be a non 409 SS stove? Do not want to get burned(PUN)!!!
Title: Re: Heatmor question
Post by: aarmga on February 24, 2017, 10:57:40 PM
They have used 409 for many many years.  Over 10 years now but I'm not 100% certain if it was 15 years ago.  I would definitely make sure!
Title: Re: Heatmor question
Post by: E Yoder on February 25, 2017, 03:23:51 AM
Thanks for the replies. Could this be a non 409 SS stove? Do not want to get burned(PUN)!!!

They started using 409 in the mid-early 90's, I think. 409 is very tough stuff. Moisture and rainwater won't hurt it sitting around.
However it can pit out in spots if it has been run with no water treatment. If they can prove they've treated and tested the value of the unit doubles.
Run some water through it- if it comes out brown it probably has sludge in the bottom and didn't have adequate treatment.
Title: Re: Heatmor question
Post by: mlappin on February 25, 2017, 05:31:45 AM
There is one down the road from me the other skin is rotted out in places but the actual firebox and water jacket is still tight, the guy build a shed around it when he installed it, he’s like the third owner I believe.
Title: Re: Heatmor question
Post by: nd guy on March 06, 2017, 09:09:47 PM
Is there anyway to use the firebox size to determine it's BTU output? How do I determine it's 409 SS? Thanks for the replies!
Title: Re: Heatmor question
Post by: lindnova on March 11, 2017, 09:22:21 AM
If there is no tag and no evidence of the real year made you don't have much to go on.  It may be older than you think.

I am on my 11th year on mine, and there are a lot of older Heatmors out there.  The 10 ga steel seems thin when a log hits it so I would definitely check for corrosion and leaks before buying.  Careless damage or improper water treatment could easily kill one early.

If it is stainless and I would assume that it is you can tell by looking for rust on the firebox.  There should be very little to none around the door opening and exposed firebox areas.  It would be caked up with rust if mild steel.
Title: Re: Heatmor question
Post by: heat550 on June 28, 2017, 02:53:42 AM
I had 1994 heatmor it was stainless tank .. not a stainless base yes it rusted out and bunch of issue I replaced it with a 400 in 2015
so rule if its used and base looks rusty I mean lot more rusty then tank its one like I had .. it needs to be split apart .and looked at see how much damage is on bottom base I put money on it shelf where tank is needs repair. .  if you do the math I got 19 years of service out of it . they can be alot older then you think :)

heat550