Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Smoke comming from damper rod opening.  (Read 3868 times)

Nooner

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • OWF Brand: Woodmaster
  • OWF Model: 4400
    • View Profile
Smoke comming from damper rod opening.
« on: November 20, 2016, 08:29:12 AM »

Hey all, just happened upon this forum while trouble shooting my Wood master 4400 HD.  I was having trouble with overheating.  I have had my stove for around 8-9 years.  I am changing the gasket on the door annually and just had a cracked flapper on the fan.  I changed out the original fan last fall after hearing a bearing going bad.  The flapper was replaced along with the fan.  Only got one season out of it.  I put the original flapper back on to get me by until I can get a replacement.  I have been noticing an increasing amount of smoke escaping from the hole where the damper rod slides in and out of the unit.  I don't ever recall this being a problem in the past.  Does anyone know if this is normal or how and what I need to fix it.   
Logged

slimjim

  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • OWF Brand: Wood Doctor / HeatMaster
  • OWF Model: 14,000. / G 200 and G 400
  • Southern Maine
    • View Profile
    • www.mainlycustom.com
Re: Smoke comming from damper rod opening.
« Reply #1 on: November 29, 2016, 02:55:21 AM »

Without knowing the product line very well, I would guess that over the years the bushing or hole that the rod slides through is getting worn from use and creosote / ash eating away at the steel.
Logged
Wood boiler sales, service and installation for the Northeastern USA.

shepherd boy

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 365
  • OWF Brand: HeatMaster
  • OWF Model: C375
    • View Profile
Re: Smoke comming from damper rod opening.
« Reply #2 on: November 29, 2016, 03:31:17 AM »

I ran a Woodmaster for a number of years and smoke coming from pull rod opening is the norm. Could get worse if there is a restriction in the exhaust area. Ash in the top tray or creosote in chimney. Never worried too much about it. Your draft damper is a problem, I'd keep a spare on hand.
Logged
Let the youngin's have it
 Gettin' old and lazy
 Lookin' for the next good fishing hole

kommandokenny

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 608
  • OWF Brand: woodmaster
  • OWF Model: 4400
  • smokem if ya gottem NEAR NORTH ONTARIO
    • View Profile
Re: Smoke comming from damper rod opening.
« Reply #3 on: December 23, 2016, 01:41:14 AM »

Overheating sounds like flapper issue in your case.The boy is right about smoke coming out the dampner rod,mines been doing it since day 1
I had to put a weight on my flapper.
Glued a lock on to the top of flapper
Common issue's from what I've read.
Logged
PARRY SOUND ONTARIO
2012 RAPTOR
NORTON COMMANDO
H.D. ROAD KING
Sthil 026,038
Echo CS 310 [grandaughters]
SWISHER 22 TON
CANAM 850 tracked
GREAT DANE X 3