Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: heat exchanger question  (Read 3539 times)

doow14

  • Full Member
  • ***
  • Offline Offline
  • Posts: 100
  • OWF Brand: shaver
  • OWF Model: 165
    • View Profile
heat exchanger question
« on: November 04, 2013, 10:50:12 AM »
noticed something today when I was changing the furnace filter.there is about 2" on each end of the heat exchanger that is wide open seems like that would let a lot of air bypass the coils. is that something worth trying to remedy or is it not a big deal?thanks for any input D
Logged
"Some People Don't Know, And The Problem Is They Don't Know That They Don't Know"

Scott7m

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3740
  • OWF Brand: Heatmaster
  • OWF Model: E Series
    • View Profile
Re: heat exchanger question
« Reply #1 on: November 04, 2013, 11:22:39 AM »
It could work better by placing some sheet metal under the edges to direct all air through the coil, I try to size them as close as possible but sometimes still have a little gap, never has cause me a problem tho
Logged
Dealer for:  Heatmaster, Empyre, Earth, Ridgewood, and Woodmaster outdoor furnaces
Furnace Parts Dealer
Pelican water treatment systems
606-316-9697

RSI

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3100
  • OWF Brand: HeatMaster
  • OWF Model: G200 and B250
    • View Profile
    • RSI
Re: heat exchanger question
« Reply #2 on: November 04, 2013, 09:57:46 PM »
If it is heating fine then I would just leave it alone. If you would like to get hotter air out the vents you could try plugging it to see if it helps much. You may need to replace it with a closer fit though if you need more heat output.
Logged

doow14

  • Full Member
  • ***
  • Offline Offline
  • Posts: 100
  • OWF Brand: shaver
  • OWF Model: 165
    • View Profile
Re: heat exchanger question
« Reply #3 on: November 05, 2013, 04:10:08 AM »
thanks I'll do something with it and see if it makes any dif.
Logged
"Some People Don't Know, And The Problem Is They Don't Know That They Don't Know"