Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:
Pages: 1 [2]

Author Topic: Heatmor tools needed.  (Read 6075 times)

juddspaintballs

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
    • View Profile
Re: Heatmor tools needed.
« Reply #15 on: December 07, 2015, 10:26:19 AM »

I wish I had a grapple.  I got the 3rd set of hydraulics hooked up so I could run one eventually.  I might weld on a grapple to the pallet fork frame as a temporary setup.  It's easiest to load up the tractor with tree limbs and push them all into the woods rather than to chip it all into mulch.  I have several more trees in the "yard" to cut down before they get leaves again.
Logged

mlappin

  • Fabricator Extraordinaire
  • Global Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4140
  • OWF Brand: homebuilt, now HeatmasterSS
  • OWF Model: Martin Steel Works Gen 1 then, now a G200.
  • North Liberty, Indiana
    • View Profile
    • Altheatsolutions
Re: Heatmor tools needed.
« Reply #16 on: December 07, 2015, 03:49:29 PM »

I wish I had a grapple.  I got the 3rd set of hydraulics hooked up so I could run one eventually.

Bought mine during the brief period of the drought of ’12 when farming was very profitable.
Logged
Stihl 023
Stihl 362
Stihl 460
Sachs Dolmar 112 and 120
Homemade skid steer mounted splitter, 30" throat, 5" cylinder
Wood-Eze model 8100 firewood processor

HeatmasterSS dealer for Northern Indiana
Pages: 1 [2]