Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: LogStor in Basement  (Read 84 times)

DBeleskey

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 23
  • OWF Brand: Polar
  • OWF Model: G2
  • Novar ON
    • View Profile
LogStor in Basement
« on: October 09, 2018, 06:37:54 PM »

Just put my LogStor pipe in the ground today. I left lots at the furnace end for connections but I am unsure about how much to leave inside once I get through the basement wall. I had a little extra so I just stuck it through the wall thinking I could cut to length tomorrow.
Is there a recommended length of pipe to leave sticking through the wall. Don't want to leave to much but also don't want to cut it off in case there is a reason that I am not seeing.

I plan on bringing the copper right down to where the LogStor comes through the wall. Is this also the recommended way ?
Logged
Polar G2
580 Case
Stihl 028
Stihl MS261

Near Novar Ontario Canada

RSI

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2899
  • OWF Brand: HeatMaster
  • OWF Model: G200
    • View Profile
    • RSI
Re: LogStor in Basement
« Reply #1 on: October 09, 2018, 09:20:50 PM »

Can be as far in as you want. I would leave enough to allow cutting off and replacing fittings a few times. If for some reason you ever have to replace the fittings you want to make sure you have pipe to work with.
Logged

DBeleskey

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 23
  • OWF Brand: Polar
  • OWF Model: G2
  • Novar ON
    • View Profile
Re: LogStor in Basement
« Reply #2 on: October 11, 2018, 07:08:29 AM »

Thanks...so a couple of feet should do.
Logged
Polar G2
580 Case
Stihl 028
Stihl MS261

Near Novar Ontario Canada