Outdoor Wood Furnace Info
Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => Mahoning => Topic started by: Leever2000 on October 04, 2018, 06:30:13 AM
-
My blower failed and have a new replacement Dayton Blower but do not have a damper. My options are to grind off the old damper and have it welded on to new blower. Are the other non welding options? See typical blower with damper for Mahoning OWF
-
If you can’t weld it your self is there enough room internally to use pop rivets?
-
Or even self tapping screws if you're careful to miss the fan wheel.
-
I had a local welder do the work for $10 and blower working well. Both of doors (firebox & ash) doors are not closing correctly (light at the corners and asked the welder what could be done. He mentioned he has a press, have any of you had doors do this and what did you do? I'm thinking it would be worth a try just because new doors are a little expensive.