Outdoor Wood Furnace Info

Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => Portage & Main => Topic started by: randy_1 on February 16, 2016, 07:22:21 PM

Title: New nossel for my 250
Post by: randy_1 on February 16, 2016, 07:22:21 PM

Karl k,, I guess I gotta break down and replace the nossel this is my 4th winter with the factory one and it's showing signs of deterioration. Message me with your address so I can get you some$$$.. Thanks..

Title: Re: New nossel for my 250
Post by: karlk on February 17, 2016, 03:14:13 AM

I sent you a pm

Title: Re: New nossel for my 250
Post by: randy_1 on February 26, 2016, 06:43:06 PM

Got the new nossel today thanks Karl k.. Now for some advise on how to remove the old one and install the new one? Anyone out there with experience?

Title: Re: New nossel for my 250
Post by: slimjim on February 27, 2016, 03:09:37 AM

Randy, can you make it through the season, if so I'll come by next time I'm through and well do it together, I have a few parts for you as well.

Title: Re: New nossel for my 250
Post by: randy_1 on February 28, 2016, 06:51:59 AM

Thanks slim.. Yes I can wait it's working fine the hole is just opening up more and more. Can't complain this is my 3rd winter ... Very pleased... Big wood mentioned to me that they had a 250 that has rust issues and that you and he had discussed a preventative maintanence plan I might wast to consider??? 

Title: Re: New nossel for my 250
Post by: Big Wood on February 28, 2016, 06:25:36 PM

I ll pencil in a day with you and we will do a tear out the nozzle and bricks on the side and give it a good  cleaning. By the way thanks  on the fluid film job still looks great might be able to use it behind the bricks

Title: Re: New nossel for my 250
Post by: randy_1 on February 28, 2016, 06:34:36 PM

Thank you both for everything,,

Title: Re: New nossel for my 250
Post by: fireman69lfd on March 30, 2016, 08:52:01 PM

Hello, I'm looking to get one of Karl K's nozzle.
Thank's

Title: Re: New nossel for my 250
Post by: slimjim on March 31, 2016, 07:46:47 AM

You can PM him on here and he will ship them directly to you.

Title: Re: New nossel for my 250
Post by: fireman69lfd on March 31, 2016, 08:45:02 AM

Thanks Slim, I'm hoping to see you at the show in Essex Jct.

Title: Re: New nossel for my 250
Post by: slimjim on March 31, 2016, 01:30:28 PM

I'll be there, would you like for me to bring a nozzle along with me, I think I have a couple at home.

Title: Re: New nossel for my 250
Post by: fireman69lfd on March 31, 2016, 07:23:18 PM

Yes please

Title: Re: New nossel for my 250
Post by: NewHampshire250 on April 14, 2016, 08:32:51 AM

First time posting on this site but been lurking for some time! For some reason it wouldn't let me sign in ! But today everything is working fine.
Anyway just wanted to say that I have run my 250 for 4 winters now and this was the best winter bye far thanks to KarlK nozzle that I got from slimjim! I have always liked my 250, but was never real happy with it's performance. But after reading a lot of your posts, a few adjustments and Karl's nozzle it has never run better. Thanks everyone for all the great advice and posts! Thanks to you also silm! Want to pick up a spare nozzle just to have and give a huge once an awhile! Thanks again

Title: Re: New nossel for my 250
Post by: slimjim on April 15, 2016, 07:09:15 AM

I have 2 here and can bring them to the Essex Jct show on  may 6-7