Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: New owner of WoodMaster 4400 with questions  (Read 3450 times)

MarineRecon

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 7
  • OWF Brand: WoodMaster
  • OWF Model: 4400
    • View Profile
New owner of WoodMaster 4400 with questions
« on: January 01, 2013, 07:49:52 PM »
We just bought a house with a WoodMaster 4400 installed in an outdoor shed with lots of room for wood. Looks like a great installation. Unit was installed new in January 2011.

Unit was working great until today. Fan flap opens but fan does not turn on. Humms only.

I reset unit as per instructions but still no go...

Ideas and suggestions welcomed

Thanks,
Nick

Logged

Scott7m

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3740
  • OWF Brand: Heatmaster
  • OWF Model: E Series
    • View Profile
Re: New owner of WoodMaster 4400 with questions
« Reply #1 on: January 01, 2013, 08:48:30 PM »
If the flap opens and fan don't come in and you can hear it humming the fan is likely bad,  check for loose wires too
Logged
Dealer for:  Heatmaster, Empyre, Earth, Ridgewood, and Woodmaster outdoor furnaces
Furnace Parts Dealer
Pelican water treatment systems
606-316-9697

victor6deep

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 393
  • OWF Brand: Burnrite
  • OWF Model: 228
    • View Profile
Re: New owner of WoodMaster 4400 with questions
« Reply #2 on: January 02, 2013, 09:46:47 PM »
Light tap the motor and drip some gear lube in the 2 small wick holes on the housing.
Logged