Outdoor Wood Furnace Info

All-Purpose OWF Discussions => General Outdoor Furnace Discussion => Topic started by: intensedrive on November 09, 2019, 10:47:01 PM

Title: I need a good Ash Rake
Post by: intensedrive on November 09, 2019, 10:47:01 PM

Does anyone have suggestions on a good ash rake?  I buy cheap garden rakes and I'm lucky to get a month use before they break, normally when trying to pull some larger pieces from the back to the front.

Title: Re: I need a good Ash Rake
Post by: E Yoder on November 11, 2019, 03:19:49 AM

If you have access to a welder I'd make one from rebar and flat metal.

Title: Re: I need a good Ash Rake
Post by: Walleye on November 11, 2019, 06:54:18 AM

Made mine out of some 3/8 rod and 3/4 conduit for a handle. 

Title: Re: I need a good Ash Rake
Post by: wreckit87 on November 11, 2019, 05:35:30 PM

Regular old garden hoe with a 3/4" EMT conduit handle would be the cat's meow I think. Very similar to what I use now but lighter

Title: Re: I need a good Ash Rake
Post by: intensedrive on November 13, 2019, 09:28:46 PM

how do I attach my garden hoe to 3/4" EMT ?

Title: Re: I need a good Ash Rake
Post by: wreckit87 on November 14, 2019, 04:05:32 PM

Bolts, weld, vise grip, flex tape, use your imagination?