Ditto on the hydraulic cement and depth. If desired it can be left open at the basement wall for a few days then foundation sealer brushed on the outside.
Logstor is some tough stuff to bend, use a 1” ratchet strap to help convince it, I went deeper at the stove end so it came up straight as possible. Use binder twine or cord to tie to the bottom of the pipe then hook your ratchet strap above ground, but off any twine or cord above ground once backfilled. Allow five foot for the radius at the stove and shop, how much inside is up to you. At the stove steel pipe, copper pipe or 1” heater hose can be used to make connections from the stove/pump to the Logstor. Or you can leave enough extra Logstor and hook it directly up.