Welcome, Guest. Please login or register.
Did you miss your activation email?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Central Boiler / Classic 5036
« on: November 10, 2017, 01:39:44 PM »
Hi all, I got alot of good info from this site already. But have an issue with creosote. I've had the boiler for a few months now and the issues I am having is if I fill it up with 1 year old wood fairly dry, when it idles it makes so much creasote it just runs down the door ...mainly on the draft door and h
Then drips out on the front of the boiler. It doesn't do this when I only put a few pcs in. But now that the temps have fallin outside I need more wood for a 12 hr burn. Once it calls for heat the creosote burns off and the cycle continues. There is a couple things I've tried new door rope new draft door and cleaned that surface. I talked to central boiler and there response was I need to keep the hot coals towards the front. The only things different in this boiler is there is grates about 6" inches off the bottom of the boiler. Sorry for the long post. Just trying to get all the info out there. Any help is appreciated
Then drips out on the front of the boiler. It doesn't do this when I only put a few pcs in. But now that the temps have fallin outside I need more wood for a 12 hr burn. Once it calls for heat the creosote burns off and the cycle continues. There is a couple things I've tried new door rope new draft door and cleaned that surface. I talked to central boiler and there response was I need to keep the hot coals towards the front. The only things different in this boiler is there is grates about 6" inches off the bottom of the boiler. Sorry for the long post. Just trying to get all the info out there. Any help is appreciated
Pages: [1]