This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Home Made / Re: Exsisting OWB wanting to convert to a gassifier

« on: March 21, 2015, 07:27:34 AM »

My stove has forced air coming in from the rear of the firebox. I hooked my tubes directly into those. The primary and secondary air come in from the same spot.

2

Home Made / Re: Exsisting OWB wanting to convert to a gassifier

« on: March 19, 2015, 07:27:57 PM »

I added two air tubes over the fire that went through the Cole bed first to preheat the over the fire air. With the increase of hot air over the fire it started a very hot secondary burn similar to the newer high efficiency wood stoves. I tried to get pictures but its hard with it currently in use. I should be able to get pictures to show soon as I'm not burning as much now with the warmer weather here in northern Michigan.

3

Home Made / Re: Exsisting OWB wanting to convert to a gassifier

« on: March 01, 2015, 10:36:47 AM »

if you're looking for more efficiency or maybe even less smoke I would recommend doing secondary air intake/combustion by adding air tubes like nature's comfort has. I did the same with my global hydronics. my wood consumption was cut by one-third

4

Fire Wood / Re: TYPE of CHAIN SAWS USED

« on: January 01, 2011, 05:29:13 PM »

i am running two jonsered 630 super's and a stihl 066magnum 20" on the 630s and a 36" on the 066