****The following images are the property*****
Of Peachy Custom Stainless, they are not to be reproduced or reused for any other reason than personal use or learning purposes. They are not to be used for for financial gain, scaling or design purposes, or any other purpose other than descriptive of the objects displayed. Any use must be authorized by written permissions given by Peachy Custom Stainless. Any design resemblance to any existing product is purely coincidental and only a direct result of common manufacturing processes and all ideas hereafter are the sole property of Peachy Custom Stainless.
Well the sky is the limit here, going to have a secondary condensing heat exchanger after I have it running and can collect some data to use for design. Initially it will be a forced draft but once the condensor is functioning it will be induced draft.
Primary chamber formed up and tacked to formed up secondary chamber
Back view primary tacked to secondary. by
Quicksilver99, on Flickr
Back welded on, air inlet plasma cut out of both chambers and exchanger pipe lower box tacked on.
IMAG0943 by
Quicksilver99, on Flickr
Exchanger plate punched and welded in place. 8 tubes, 2.375" od with .140" wall at 40" long. The plate is 1/4" thick, knocked it out on a strippit cnc punch on my lunch break.
IMAG0944.jpg by
Quicksilver99, on Flickr