Outdoor Wood Furnace Info
All-Purpose OWF Discussions => Pools & Hot Tubs => Topic started by: woodmaster40 on April 20, 2015, 01:12:18 PM
-
Just bought the following heat exchanger to heat my pool with my Woodmaster 4400. Going to be setting up in the next week or so. Just was wondering if anyone else out there wanted to share info about their setups or had any tips to share.
http://www.outdoorfurnacesupply.com/pool-spa-heat-exchangers/sp-360k.html (http://www.outdoorfurnacesupply.com/pool-spa-heat-exchangers/sp-360k.html)
-
You'll probably want a mixing valve before your return line goes back to your stove. Or, you can undersize your exchange tube. Do you have your wet well and three way valve already?