Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: 20" bar of stihl ms028  (Read 2855 times)

Chugger4030

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 27
  • OWF Brand: Central boiler
  • OWF Model: Cb4030
    • View Profile
20" bar of stihl ms028
« on: February 28, 2012, 05:12:08 AM »
I have a ms028 that i use to cut firewood with about 15 cords a year. Clear brush etc. It cuts great with the 16inch bar but when i get into larger pieces and trees it really slows down. I see i can put a 20" bar and chain on. Would this be worth the price?

Logged

BIGDIESEL20S

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 82
  • OWF Brand: Hardy
  • OWF Model: H-2
    • View Profile
Re: 20" bar of stihl ms028
« Reply #1 on: February 28, 2012, 06:36:46 AM »
Is the saw slowing down or is progress slowing down do to the bar not reaching through the big pieces?
Logged
2002 F250 SUPER DUTY 4X4
1994 CHEVROLET S-10 4X4
HOME MADE 20 TON SPLITER
STIHL: 009, 011, MS250, 026, MS260, 028 SUPER,  028FARMBOSS, 029 SUPER, 031, 031 SUPER, 066.
176 ACERS HALF WOODS
HOME MADE PICKUP BED TRAILER
801 FORD POWERMASTER
B414 ITERNATIONAL
H FARMALL

Chugger4030

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 27
  • OWF Brand: Central boiler
  • OWF Model: Cb4030
    • View Profile
Re: 20" bar of stihl ms028
« Reply #2 on: February 28, 2012, 09:37:40 AM »
It slows down because the pieces are larger than the bar.
Logged

Scott7m

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3740
  • OWF Brand: Heatmaster
  • OWF Model: E Series
    • View Profile
Re: 20" bar of stihl ms028
« Reply #3 on: February 28, 2012, 05:58:49 PM »
Your gonna be disappointed in an 028 with the 20" bar.  If it slows down when you have a 16" bar buried a 20" will kill it that much more. 
Logged
Dealer for:  Heatmaster, Empyre, Earth, Ridgewood, and Woodmaster outdoor furnaces
Furnace Parts Dealer
Pelican water treatment systems
606-316-9697

Chugger4030

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 27
  • OWF Brand: Central boiler
  • OWF Model: Cb4030
    • View Profile
Re: 20" bar of stihl ms028
« Reply #4 on: February 29, 2012, 05:00:34 AM »
Was wondering for felling trees would a full skip chisel be the best chain for the job? I have the ms280 set up for 3/8 right now with a standard chisel chain.
I have run a semi skip but never a full skip. I pretty much rulled out a 20" bar so was wondering if anyone had any experience with a full skip chain on a ms280.
« Last Edit: March 14, 2012, 05:11:19 PM by Chugger4030 »
Logged