Welcome, Guest. Please login or register.
Did you miss your activation email?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
16
Fire Wood / Re: Ton=?cord
« on: January 14, 2015, 09:24:50 AM »
JDFarmer, just started to burn only coal today. Like the ideal to put coal down the center and small amount of wood on the sides. Guess Ill see how that works.
17
General Outdoor Furnace Discussion / Re: I need some help!
« on: January 14, 2015, 09:21:36 AM »
justinb, guessing that soft wood you might cut to fan back to keep from burning as fast. Lot of discussion on fan speed. I know guys running at 40% and 100%. Im at 100% and have had it at 50 to 70 % at times I have a 5000E . It seems to depend on how good the wood is. Green, dry, oak, Etc. I just started to burning coal going to see how it goes for a few days.
18
Fire Wood / Re: Ton=?cord
« on: January 12, 2015, 09:03:22 PM »
JD,
Do you mix wood and coal by shoveling in coal on the wood.
Do you mix wood and coal by shoveling in coal on the wood.
19
General Discussion / Re: VFW's petition to not cut any military benefits
« on: January 12, 2015, 08:58:42 PM »
Thanks for posting, USN/USMC Vet
20
Fire Wood / Re: Knots in firewood
« on: January 10, 2015, 06:00:15 PM »
Burn it your right, H*** of lot of work splitting it
21
Fire Wood / Knots in firewood
« on: January 10, 2015, 04:59:12 PM »
Any input on what kind of burns you get with knotted wood. I haven't started to burn it yet but I have some serious knots in Oak that my 22 ton splitter had a rough time cutting, just wondering if anyone has burn much of it.
22
HeatMaster / Re: Will this vent pipe work?
« on: January 08, 2015, 09:46:05 AM »
AirForcePol,
you might want to check but the Menards pipe is 8" think we have 6" out of our OWB
you might want to check but the Menards pipe is 8" think we have 6" out of our OWB
23
HeatMaster / Re: Will this vent pipe work?
« on: January 08, 2015, 09:39:12 AM »
AirForcePol,
I have 8' of triple wall S/S on my 5000E, came from TSC. It not exactly whats coming out of the OWB but it fits and work OK. Just using the flashing to keep it solid, only about 2' out of the roof of my building.
I have 8' of triple wall S/S on my 5000E, came from TSC. It not exactly whats coming out of the OWB but it fits and work OK. Just using the flashing to keep it solid, only about 2' out of the roof of my building.
24
General Outdoor Furnace Discussion / Moisture meters
« on: January 01, 2015, 12:18:28 PM »
Anyone tell me where you can get a Moisture meter ? What would be a good average of moisture in your wood.
25
General Outdoor Furnace Discussion / Re: I need some help!
« on: January 01, 2015, 10:10:55 AM »
How did you WB do last night ? Im using a 5000E also first year and fill it 2/3 full at 9:00 pm and at 7:00 am have very little wood left. I did find out that im getting better burn if reduce 50 to 70%, also if I don't have a good ash base I good through more wood, haven't quite figured out how to keep that base though. I do think I get about the same burn time if I fill it to the top or just about 2/3 full.
26
General Outdoor Furnace Discussion / Re: Differentials
« on: November 18, 2014, 08:21:02 AM »
I have a Heatmaster 5000E 150 feet from my house run 175 -180 Logstor pipe 3200 sf house stays 70 with no problem
27
Hawken Energy, support only / Re: How much wood in a single load?
« on: November 18, 2014, 07:05:45 AM »
Not sure how big you box is but I have a Heatmaster 5000E and last night it was around 12 to 15 all night I filled mine up about 3/4 full of not very seasoned wood and it burn from 10:00 pm till 7:00 am keeping the house at 70 all night. Just about burn up at 7:00 am, sounds like your is about right.
28
General Outdoor Furnace Discussion / Re: Supply Return lines
« on: November 17, 2014, 11:51:57 AM »
The OWB
29
General Outdoor Furnace Discussion / Re: Supply Return lines
« on: November 17, 2014, 11:40:25 AM »
Do you think it affects the tem of the supply water, since it coming out of the top not the bottom
30
General Outdoor Furnace Discussion / Supply Return lines
« on: November 17, 2014, 09:12:22 AM »
I started my burner about a week ago and its working great. I noticed this morning the contractor who installed the water lines has the supply and return lines reversed. How is this going to effect the supply line water temp, it seem to be working ok now. Wondering if it will effect my warranty.