Welcome, Guest. Please login or register.
Did you miss your activation email?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Portage & Main / setting differential
« on: December 12, 2016, 05:44:58 AM »
What are the benefits of setting it low or higher #I think mine came set at 6 now at 8.
2
Portage & Main / changing pipes
« on: October 15, 2016, 12:06:52 PM »
This summer i changed the pipes so that it draws from the bottom and return to the top.I now notice that there is a 10 to 12 degree temp drop from the stove to the house that i did not have before.
3
Portage & Main / 28-40
« on: March 26, 2016, 02:19:24 PM »
I have had this stove all this winter,and if they would take it back and refund my money i would give it back.First i made a outside stove that i used for 13 years ,till the back rusted through.
-this stove smokes out the fill door no matter what i do,need a hazmat suit to fill the stove LOL
-the water level gauge is a joke,i have to remove the gauge to fill it,and it only takes a bought 3 quarts from full to empty.
-the fill door is made for left handed people,get dirty when my back end rubs on the open door.
-they never finished the corners in the opening between the two doors, open insulation is exposed to sparks
-have to open the back door to access the switch to shut of fan
-no back light in control ,need a flash light to read temp
-no insulation on back door
-to deep from fill opening to bottom of stove,makes it hard to fill with big wood.
-this stove smokes out the fill door no matter what i do,need a hazmat suit to fill the stove LOL
-the water level gauge is a joke,i have to remove the gauge to fill it,and it only takes a bought 3 quarts from full to empty.
-the fill door is made for left handed people,get dirty when my back end rubs on the open door.
-they never finished the corners in the opening between the two doors, open insulation is exposed to sparks
-have to open the back door to access the switch to shut of fan
-no back light in control ,need a flash light to read temp
-no insulation on back door
-to deep from fill opening to bottom of stove,makes it hard to fill with big wood.
4
Portage & Main / moisture out chimney
« on: January 20, 2016, 06:38:11 AM »
This is my first post,2840 has been running for 2 weeks. I have water drip out chimney clean out,i have brown ice sickles hanging there.b Smoke at fill up-if the fan is on it is not bad but you have to be fast or it gets HOT fast. If I fill it like they say, I cannot see from the smoke.
Has anyone added a length of chimney to get better draft?
Thanks, Mike
Has anyone added a length of chimney to get better draft?
Thanks, Mike
Pages: [1]