Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Cleaning plate exchanger  (Read 2787 times)

Walleye

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 35
  • OWF Brand: Central Boiler
  • OWF Model: 6048
    • View Profile
Cleaning plate exchanger
« on: November 03, 2021, 11:38:23 AM »

I have a 10 plate exchanger in my shop basically so I can have hot water to wash my hands in! Its fed with raw unsoftened water from my well so its pretty crappy water. In the past I have flushed CLR through it to clean it out with good results. Well now its almost completely plugged. IS there anything that would clean it better that wouldn't harm the exchanger? Its currently soaking with CLR so I'm hoping it will eventually break somewhat loose. 
Logged

WoodMOJoe

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 312
  • OWF Brand: Homemade Tank-in-Tank Furnace
  • OWF Model: Ol' Fireball #0002
    • View Profile
Re: Cleaning plate exchanger
« Reply #1 on: November 04, 2021, 09:33:19 AM »

I literally just came here to ask the same question!

Our water is extremely hard and will plug up a 20 plate exchanger in 1 1/2 to 2 winters use.

I have the flush ports already on my plumbing.

Logged
Southwest Missouri Ozarks...USA

RSI

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3100
  • OWF Brand: HeatMaster
  • OWF Model: G200 and B250
    • View Profile
    • RSI
Re: Cleaning plate exchanger
« Reply #2 on: November 04, 2021, 10:19:11 PM »

I would throw the 10 plate away and get a 20 for starters.

Depending on what is in it, just vinegar might be all you need to use. It will require pumping it through though. Just dumping it in will never clean it out completely. When I have done it, I just pump out of a gallon jug of vinegar and put return hose into jug too. Run pump till it is as dark green as it will get and then swap out to a new jug. Keep doing it till it stays clear.

You should be able to do the same thing with stronger chemicals but need pump and hoses that are compatible.
Logged

WoodMOJoe

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 312
  • OWF Brand: Homemade Tank-in-Tank Furnace
  • OWF Model: Ol' Fireball #0002
    • View Profile
Re: Cleaning plate exchanger
« Reply #3 on: November 05, 2021, 05:35:38 AM »

Thanks RSI, I should have thought of vinegar.

Cheap and readily available I will give it a try.   :thumbup:
Logged
Southwest Missouri Ozarks...USA