Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Brass fittings  (Read 4557 times)

timothy4140

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 9
  • OWF Brand: Portage & Main
  • OWF Model: BL 34-44
    • View Profile
Brass fittings
« on: December 26, 2020, 09:19:22 PM »

This past week I had my second fitting on my heat exchanger developed a leak, when changed it was paper thin as if it was sand blasted...
This is second time, first year or so ago, different heat exchanger...
Thoughts???
Logged
Tim C
Winchester, Virginia
Ford F350
Kubota RTV
New Holland TA95

mlappin

  • Fabricator Extraordinaire
  • Global Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4140
  • OWF Brand: homebuilt, now HeatmasterSS
  • OWF Model: Martin Steel Works Gen 1 then, now a G200.
  • North Liberty, Indiana
    • View Profile
    • Altheatsolutions
Re: Brass fittings
« Reply #1 on: December 27, 2020, 08:52:08 PM »

Something with the water, boiler side or domestic or both? Maybe try dielectric unions?
Logged
Stihl 023
Stihl 362
Stihl 460
Sachs Dolmar 112 and 120
Homemade skid steer mounted splitter, 30" throat, 5" cylinder
Wood-Eze model 8100 firewood processor

HeatmasterSS dealer for Northern Indiana

RSI

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3100
  • OWF Brand: HeatMaster
  • OWF Model: G200 and B250
    • View Profile
    • RSI
Re: Brass fittings
« Reply #2 on: December 27, 2020, 10:25:36 PM »

What kind of fittings are these? Is your pump way oversized?
I would collect a sample in a clear jar and let it settle and see if there is much sediment in it. if there is then I would install a filter.
If you haven't had the water tested recently, I would look into getting that done.
Logged

E Yoder

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1296
  • OWF Brand: HeatMaster
  • OWF Model: GS 100
    • View Profile
    • www.heatmasterfurnace.com
Re: Brass fittings
« Reply #3 on: December 28, 2020, 04:17:36 AM »

Were these fittings on the domestic side or boiler side?
I saw a HeatMaster unit with various fittings honeycombed thin recently. Turns out they were using some odd powdered water treatment. I think electrolysis was doing its thing.
Logged
HeatMaster dealer serving southwest VA.
www.heatmasterfurnace.com

mlappin

  • Fabricator Extraordinaire
  • Global Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4140
  • OWF Brand: homebuilt, now HeatmasterSS
  • OWF Model: Martin Steel Works Gen 1 then, now a G200.
  • North Liberty, Indiana
    • View Profile
    • Altheatsolutions
Re: Brass fittings
« Reply #4 on: December 28, 2020, 09:11:30 AM »

Were these fittings on the domestic side or boiler side?
I saw a HeatMaster unit with various fittings honeycombed thin recently. Turns out they were using some odd powdered water treatment. I think electrolysis was doing its thing.

Much like in a diesel I imagine. I have a sleeve out of a Waukesha that had numerous pits around the bottom ring and one made it clear thru the liner eventually.
Logged
Stihl 023
Stihl 362
Stihl 460
Sachs Dolmar 112 and 120
Homemade skid steer mounted splitter, 30" throat, 5" cylinder
Wood-Eze model 8100 firewood processor

HeatmasterSS dealer for Northern Indiana

Radio Tech1964

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 69
  • OWF Brand: Hawken Energy
  • OWF Model: HE-1100
  • Stihl MS 250 John Deere CS 36 2013
    • View Profile
    • Weather Info
Re: Brass fittings
« Reply #5 on: December 29, 2020, 10:17:16 PM »

This brought up a good question for me..Did I ground the boiler when I reinstalled it  ::)
Better check that tomorrow that would go some ways to reducing the effects of electrolysis.
I was half frozen to death when I installed this time and I have never even looked at grounding since. :D
Logged