Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Chimney Height on G2  (Read 10611 times)

DBeleskey

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 95
  • OWF Brand: Polar
  • OWF Model: G2
  • Novar ON
    • View Profile
Chimney Height on G2
« on: September 16, 2021, 08:27:29 AM »

I have a Polar G2 furnace. I have the chimney pipe that came with the stove installed (2 foot length). I find that most times when stoking the furnace I get over run with smoke. The chimney cap tends to blow the smoke down to the top of the furnace but, I like the cap on to keep the rain and snow out when the furnace fan is off.

I was thinking of adding a length of pipe, maybe three feet, to what is there to get the smoke a bit higher above the furnace. Is it advisable to do this or will it affect by burn or cause any other issues  .
Logged
Polar G2
580 Case
Kubota F2100
Stihl 028
Stihl MS261

Living the dream...
Near Novar Ontario Canada

mlappin

  • Fabricator Extraordinaire
  • Global Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4140
  • OWF Brand: homebuilt, now HeatmasterSS
  • OWF Model: Martin Steel Works Gen 1 then, now a G200.
  • North Liberty, Indiana
    • View Profile
    • Altheatsolutions
Re: Chimney Height on G2
« Reply #1 on: September 16, 2021, 02:15:56 PM »

Generally, not alway though, adding stack will increase draw, as long as your door seals are good and the damper shuts tight shouldn’t be an issue.
Logged
Stihl 023
Stihl 362
Stihl 460
Sachs Dolmar 112 and 120
Homemade skid steer mounted splitter, 30" throat, 5" cylinder
Wood-Eze model 8100 firewood processor

HeatmasterSS dealer for Northern Indiana

DBeleskey

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 95
  • OWF Brand: Polar
  • OWF Model: G2
  • Novar ON
    • View Profile
Re: Chimney Height on G2
« Reply #2 on: September 20, 2021, 08:41:38 AM »

Thanks
I even thought about a foot or maybe two. The reason I thought three feet was the price difference is minimal and I could always just remove the original two foot piece and leave the three foot piece ending up just adding a foot in total.

Just thinking....don't want to cause any issues. The furnace works great except for the odd bit of smoke every once in a while...
Logged
Polar G2
580 Case
Kubota F2100
Stihl 028
Stihl MS261

Living the dream...
Near Novar Ontario Canada