Welcome, Guest. Please login or register.
Did you miss your activation email?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
91
Electronics / Re: hooking thermostat to a oil fired furnace w/owb
« on: November 11, 2011, 09:05:34 AM »
rsi if you number is the 608 i sent another picture
92
Electronics / Re: hooking thermostat to a oil fired furnace w/owb
« on: November 11, 2011, 08:29:28 AM »
i would be happy right now if i could figure out how to make the furnace stop firing so i could just use the blower either way right now would be great.
93
Electronics / Re: hooking thermostat to a oil fired furnace w/owb
« on: November 10, 2011, 08:14:48 PM »
if you read my last post , i think the blue and orange might fire the blower but im getting nervise touching wires togeither i really dont want to burn something up.
94
Electronics / Re: hooking thermostat to a oil fired furnace w/owb
« on: November 10, 2011, 05:47:40 PM »
no blow dose not run if i touch these 2 wires togeither, i looked at the wires the blue one is on the on setting like if the furnace is to fire normally hooks to one side of the limit and fan switch,black wire is in the center of the switch witch goes to the main 2 wires coming in ,3rd wire is orange and goes to the other side of the limit switch and fan switch.
95
Electronics / Re: hooking thermostat to a oil fired furnace w/owb
« on: November 10, 2011, 04:52:49 PM »
ok on the fresh air side of the switch its orange witch goes to the fan sensor and the black wire witch is in the center of the switch
96
Electronics / Re: hooking thermostat to a oil fired furnace w/owb
« on: November 10, 2011, 03:49:15 PM »
ok put the 2 wires togeither sparked but did not start the blower. i took pictures of the switch and wiring i'm sending them your way if your cell was the 608
97
Electronics / Re: hooking thermostat to a oil fired furnace w/owb
« on: November 10, 2011, 02:50:24 PM »
yes the switch is on the furnace, no when switched to fresh air just the fan comes on but stays on till i switch it of or to on for firing the furnace . they are normal size wires like maybe a 14 guage wire like the rest of the wires. RSI i think your the one i sent pictures to if you want i have unlimited text if youd like to text me. dont mean to rush anyone but i need to get this working as soon as possible because of my work if starts to get cold and snows i'm not home much ...thanks paul 518 335 3883 cell
98
Electronics / Re: hooking thermostat to a oil fired furnace w/owb
« on: November 10, 2011, 01:44:24 PM »
yes i can get to the 3 wires on the switch they are slip connectors .
99
General Outdoor Furnace Discussion / Re: Are people afraid of work?
« on: November 10, 2011, 01:39:11 PM »
i'm of the younger age, i'm 42 and i also enjoy working on the wood i take it 1 step further i go and collect the logs also.paul
100
Electronics / Re: hooking thermostat to a oil fired furnace w/owb
« on: November 09, 2011, 06:01:48 PM »
ok first answer the 4 wire picture i sent the 2 wire on top go to the oil furnace thermostat marked (T) the second 2 hooked to (F) go to an eye in the burner. the fan switch on the plenum can not be set its a sealed unit. this does have a switch its a 3 position switch witch says on/off/fresh air i put it on fresh air but it makes the fan run all the time witch my wife liked but i didnt because it was over 95 degrees in our house
101
WoodMaster / wood master 434
« on: November 09, 2011, 05:47:05 PM »
is the any 434's still in use? thanks
102
WoodMaster / Re: WM Temperature setting differences
« on: November 09, 2011, 05:38:32 PM »
alan where do you live and how much wood do you go thru? thanks paul
103
Electronics / Re: hooking thermostat to a oil fired furnace w/owb
« on: November 09, 2011, 05:27:48 PM »
pictures on there way thanks
104
Electronics / Re: hooking thermostat to a oil fired furnace w/owb
« on: November 09, 2011, 04:47:45 PM »
yes there is a fan switch and a limit switch its the little round style ,i believe its a circuit board depends what you call it . it has a reset switch if you have a cell i can send ya a picture of the whole set up. thanks paul
105
Electronics / Re: hooking thermostat to a oil fired furnace w/owb
« on: November 09, 2011, 01:31:49 PM »
i have a programable thermostat but theres only 2 wires going to the thermostat. bull you say you hooked it up to the blower this is where im lost my control has2) t letters and this is where the thermostat is hooked now for the furnace and then there 2) marked F where do i hook it? thanks paul please call my cell at 335 3883 or give me your cell and i'll send ya pictures of my set up