Outdoor Wood Furnace Info

All-Purpose OWF Discussions => General Outdoor Furnace Discussion => Topic started by: NaturallyAspirated on December 11, 2018, 01:14:00 PM

Title: PM - Modern Hydronics Done Right
Post by: NaturallyAspirated on December 11, 2018, 01:14:00 PM

Free ebook of a collection of John Siegenthaler:

http://digital.bnpmedia.com/publication/?i=537154#{%22issue_id%22:537154,%22numpages%22:1,%22page%22:1}

 :thumbup:

Title: Re: PM - Modern Hydronics Done Right
Post by: 1madtrapper on February 02, 2019, 09:05:07 PM

 Great thread I am new also hooked my boiler right up to the manifold turned the boiler to 135 and it worked great but learned from experienced guys to put mixing valve in. Running my house at 105 in and its coming out at 87-90 depending on the temps it has been -40 for the last wk.  I run three speed pumps on the inside to the manifold so you can speed them up or slow them down to change the delta and help fine tune. Still tweaking mine but finding the room temp seems to be about 5 degrees lower then the floor temp.