Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Shrek1112

Pages: [1]
1
General Outdoor Furnace Discussion / Smoke issue
« on: January 05, 2015, 12:04:16 PM »
Does any one have lot of smoke coming out the load door when filling.  I have tried just cracking the door to let it vent but still get a bunch rolling out at me. Makes it hard to rake and fill.  Only the start of my second month with my unit. Still learning the curve.   Also wondering if stack height makes a difference as I have only have a cap on my unit.

2
Hawken Energy, support only / Loading
« on: January 04, 2015, 03:00:05 PM »
Does any other Hawken owner, or other manufacturer owner for that matter, have lot of smoke coming out the load door when filling.  I have tried just cracking the door to let it vent but still get a bunch rolling out at me. Makes it hard to rake and fill.  Only the start of my second month with my unit. Still learning the curve.   Also wondering if stack height makes a difference as I have only have a cap on my unit.

3
Equipment / Splitter Valve
« on: January 02, 2015, 08:36:31 PM »
I have a Husky 35T splitter that should detent upon return for hands free.  Only after running for 20 or more minutes will it work properly.  Any suggestions as to why it only works when "warmed up" or is this normal?

4
Hawken Energy, support only / Creosote Leak on loading door
« on: December 27, 2014, 04:28:49 PM »
I have adjusted my loading door on my one month old HE-2100 and still have creosote dripping/leaking out of the bottom left corner.  I am concerned that any more tightening will crush the door seal and ruin it.  Has anyone else had this issue and found a solution?

5
Electronics / Can I use a programmable T-stat for the OWF?
« on: December 22, 2014, 10:18:29 AM »
My new OWF was installed with a digital Honeywell. The existing gas furnace has a programmable honeywell also. Is it possible to use a programmable one for the OWF? I don't need to keep the house at 70+ when we are not home for 10-12 hours a day during work and after school sporting events with the children. Also any recommendations on a good one if I can do the switch?

6
Plumbing / Sulfur smell
« on: December 21, 2014, 08:24:11 PM »
I recently had a Hawken HE-2100 installed with DHW plate exchanger on the outlet side of my water heater.  I have turned the water heater to pilot mode to save more on propane but we have recently noticed the strong sulfer/rotten egg smell when using hot water. I have read many articles that point to an anode issue in the water heater but it seems odd that it would happen right after our boiler was up and running. Any suggestions would be appreciated. 

7
Hawken Energy, support only / Hot water smell
« on: December 21, 2014, 09:15:05 AM »
I recently had a HE-2100 installed with DHW plate exchanger on the outlet side of my water heater.  I have turned the water heater to pilot mode to save more money but we have recently noticed the strong sulfer/rotten egg smell. I have read many articles that point to anode issue but it seems odd that it would happen right after our broiler was up and running. Any suggestions would be appreciated. 

8
Natures Comfort / Natures Comfort vs. Central Boiler
« on: November 03, 2013, 07:59:44 AM »
I am in the market for our first OWB and would like to know what people think the pros and cons of the NCB 325 and the CB 6048. Will be heating 3000 soft home, dhw, and a larger pole barn workshop.  Also wondering the benifitsnof a plate hx vs. a shell tube.  Thank you for any insight. 

Pages: [1]