Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Plumbing on heatmaster  (Read 1729 times)

andyjs

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 57
  • OWF Brand: heatmaster
  • OWF Model: 10000e
    • View Profile
Plumbing on heatmaster
« on: September 28, 2015, 08:03:51 AM »
Need to connect my 1" logstor pipe to 1" copper stub pipe one on top by the valve and other on bottom of pump. Had them hooked direct and stove shifted and moved during freezing and thawing. Need something more flexible. The lines would stretch out and leak at the compression fitting . Any ideas? Seen the flex stainless but heard it's junk .
Logged

slimjim

  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • OWF Brand: Wood Doctor / HeatMaster
  • OWF Model: 14,000. / G 200 and G 400
  • Southern Maine
    • View Profile
    • www.mainlycustom.com
Re: Plumbing on heatmaster
« Reply #1 on: September 28, 2015, 10:15:10 AM »
I'm now using 1 inch automotive heater hose for a flexible line between the Logstor and boiler plumbing, the heater hose will slide over 1 inch copper with a bit of lube not the pipe and hose, clamp it up and you are done, do not kink the line.
Logged
Wood boiler sales, service and installation for the Northeastern USA.