Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: New fan assembly Gasket?  (Read 2199 times)

Goat Herder

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 34
  • OWF Brand: WOODMASTER
  • OWF Model: HEAVY DUTY 4400
    • View Profile
New fan assembly Gasket?
« on: February 03, 2017, 06:45:50 PM »

My woodmaster 4400 fan quit, heard it moaning When I stepped out of the house, went and looked at it it and made a screech.....game over, drove a couple hours to Nashville, Il to Kessler Hardware, great people, bought a new fan, back on...all good.

Question: I wanted to get the water circulating again and heat back on, also make sure all is good.  The old blower had a thin gasket, no gasket with the new one, and I did not use any gasket material. 
Going to watch for runaway temps next few hours.

Do I need a gasket?   Or, gasket material between blower and the door?
Logged

aarmga

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 423
  • OWF Brand: Nature's Comfort
  • OWF Model: NCB-250
  • Central Wisconsin
    • View Profile
Re: New fan assembly Gasket?
« Reply #1 on: February 03, 2017, 10:45:23 PM »

I personally would recommend a gasket.  Metal can expand and contract enough to eventually have a gap large enough to have an air leak there.  It is good insurance anyway.  Mine has a tiny flat rope seal gasket like our doors use.  I'm sure you could even use a small bead of high temp rtv to keep the air out as well.  If you decide to go that route I'll send you a picture of what I use for rtv.  U can pick it up at a large hardware/outdoor store.
Logged
Stihl 211 - 16"
Remington Rodeo Pro - 20"
Stihl 661r magnum - 36"
SpeeCo 22 Ton Honda splitter
JD 1025r with FEL
Natures Comfort NCB 250 custom added overhead air injection