Outdoor Wood Furnace Info
Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => WoodMaster => Topic started by: steely01 on October 18, 2011, 06:29:55 PM
-
My 4400 water level indicator light is not working. It worked a couple of weeks ago when I was getting the boiler ready for winter. I checked my water level and it is fine, I topped it off when I lit the boiler for the winter this past weekend. This is my 4th winter using my 4400. My temp has not gone above 180 this week. any suggestions?
-
Welcome steely01, check the bulb first and then make sure the float is not stuck.
-
Thanks I will!
-
Mine had the same problem, not the bulb because its an led. This summer when I drained and refilled it worked for a day or two then out again
-
It was the indicator, ordered a new indicator and replacing it was a snap. Glad it was not the float.