Outdoor Wood Furnace Info

Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => Central Boiler => Topic started by: 5050racing on March 02, 2014, 06:32:09 AM

Title: Time to load
Post by: 5050racing on March 02, 2014, 06:32:09 AM
Boy do I love this thing E-1450 time to go load it just went 15 hrs overnight house nice and warm temp outside 20s overnight and now 28,don't know how it could be any better,didn't even fill it all the way,nice dry oak!!
Title: Re: Time to load
Post by: Roger2561 on March 02, 2014, 08:22:14 AM
Glad to hear that your CB-1450 is keeping you warm and nice burn times.  I don't have the 1450, I have the 1400 but it works great.  I clean mine every 2 weeks including removing the ash from the reaction chamber.  I have found that there was no change in operation and the amount of ash found in the reaction chamber.   Roger
Title: Re: Time to load
Post by: 5050racing on March 02, 2014, 10:41:13 AM
Clean mine once a week but we have been in the single digits every night and not above freezing till today in like months.i could get called out for a long extended job and not get home sometimes so dont want the wife to get stuck doing it,even though she knows how no reason to let that happen.
Title: Re: Time to load
Post by: Roger2561 on March 02, 2014, 01:04:25 PM
I have found with the 1400 that the colder it is, I get a more complete and cleaner burn.  I'll try to clarify.  If the temps are above 30, the coal bed gets too deep so I have to try to cut back on the amount of wood I put in it.  If that doesn't do the trick, I'll have to remove some of it.  But, when the temps are colder, lets say around single digit or lower, the OWB cycles more often with a hotter burn.  Thus, the coal bed doesn't get as deep (stays around the 3 inch depth), the creosote buildup is minimized and much less ash. 

What temps are you operating your 1450?  My high set-point is 190 and low set-point is 185 with a 50 second pulse every 8 minutes. 

Roger
Title: Re: Time to load
Post by: 5050racing on March 02, 2014, 02:09:13 PM
Factory settings,175 burn shut off 185 pulse  every 30 min works great,wouldn't want to change it with my setup it's great!direct connect to boiler,and heat exchanger on domestic hot water NICE  oil and propane delivery guys out of business !  I had a inside wood boiler 18 years so I haven't bought oil since it was $.98 cents a gal.!!!!!
Title: Re: Time to load
Post by: Roger2561 on March 02, 2014, 04:16:35 PM
Factory settings,175 burn shut off 185 pulse  every 30 min works great,wouldn't want to change it with my setup it's great!direct connect to boiler,and heat exchanger on domestic hot water NICE  oil and propane delivery guys out of business !  I had a inside wood boiler 18 years so I haven't bought oil since it was $.98 cents a gal.!!!!!

Okay, with that $0.98/gal price, you're aging yourself.   ;) 
Title: Re: Time to load
Post by: 5050racing on March 02, 2014, 04:31:32 PM
Only 50,been doing it a long time
Title: Re: Time to load
Post by: 5050racing on March 02, 2014, 04:33:03 PM
That oil price is only 11 years ago!
Title: Re: Time to load
Post by: 5050racing on March 02, 2014, 04:35:47 PM
http://www.oma-oilheat.org/PDF/priceComparisonMay06.pdf. (http://www.oma-oilheat.org/PDF/priceComparisonMay06.pdf.)  Check this out
Title: Re: Time to load
Post by: Grappleload on March 08, 2014, 02:30:12 PM
I love these units. I can get through 24 hours and not even fill my firebox all the way. Never had to remove ash and very little cleaning of reaction chamber. Been through about 7 cord this year. Time to restock and say bye bye to the propane man. E2400 is the boss
Title: Re: Time to load
Post by: slimjim on March 08, 2014, 03:50:30 PM
5050, I clicked on it and it won't load, Must be a conspiracy, 11 years, seems like yesterday, that's when I bought my old conventional, 2 1/2 years it paid for itself and My wife and I have never regretted it, the grown babies yes but not us, the eldest we nicknamed GET WOOD!!!!!
Title: Re: Time to load
Post by: 5050racing on March 08, 2014, 04:09:36 PM
 That's was a chart goggle oil prices you will see 11 12 years ago oil $1:00/gal, yeah a gone maybe 4 or so cord but do I love this thing!! Never taken ash out of fire box just clean reaction chamber,I look at it each week then since I'm in there drag what's in there out,2 times it was really needing it.cleaned it say 6,7 times all year say it would barely fill a wheelbarrow 
Title: Re: Time to load
Post by: mikect05 on March 23, 2014, 06:14:19 PM
How many square ft are ya'll heating with the 1450?
Title: Re: Time to load
Post by: 5050racing on September 05, 2014, 09:59:03 AM
Really it's not the proper question 4 bedrooms ,kit,living,familyroom,2 teens,wife clothes washer it heats the hot domestic hot water all with no trouble at 70 inside,and we sure had a winter last year!!  Don't go to big that's what I thought that it was small but you want it to run a little,used maybe 5-6 cords not a good judge of wood amounts.LOVE IT!