This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

16

RidgeWood Stoves, defunct, support only / Re: Cracks

« on: May 13, 2016, 02:59:54 PM »

I'll for sure use my generator. I guess I could just weld a patch over the crack. It's not leaking yet so I can patch it good and I might be good for a while .

17

RidgeWood Stoves, defunct, support only / Re: Cracks

« on: May 13, 2016, 08:39:01 AM »

Did you have to pull the siding off the front and the insulation when you welded it?

18

RidgeWood Stoves, defunct, support only / Re: Cracks

« on: May 13, 2016, 05:04:49 AM »

I have a welder but I don't think it's big enough for the job. It's a lincoln 140. I'm not that good of a welder.

19

RidgeWood Stoves, defunct, support only / Re: Cracks

« on: May 12, 2016, 01:13:49 PM »

They will weld it if I bring it to them 250 miles away. Other then that they offer no help. They could care less about anyone that bought one. Lesson learned I quess.

20

RidgeWood Stoves, defunct, support only / Re: Cracks

« on: May 11, 2016, 11:40:14 AM »

Ya that asshole owner from Ridgewood never responded to my email about the cracks what a prick. I would like to shove this stove up his punk ass.

21

RidgeWood Stoves, defunct, support only / Re: Cracks

« on: May 04, 2016, 01:43:54 PM »

So they know I am the original owner.  I'm still waiting to hear something. 

22

RidgeWood Stoves, defunct, support only / Re: Cracks

« on: May 03, 2016, 12:45:42 PM »

I just sent them the photos so I'll let you know what they say.

23

RidgeWood Stoves, defunct, support only / Re: Cracks

« on: May 03, 2016, 12:07:05 PM »

They want me to send in the photos and pic of bill of sale and photo  of warranty and there gonna look into it.  First he said bring my stove to them. I said that's not gonna happen. Then he told me to get a price on hiring a welder and they might pay for half the bill. I don't think there gonna do anything.

24

RidgeWood Stoves, defunct, support only / Re: Cracks

« on: May 02, 2016, 10:53:19 AM »

I know mine never overheated I keep a close on the water level . It's always ran nice. Thank god it never leaked yet.

25

RidgeWood Stoves, defunct, support only / Re: Cracks

« on: May 01, 2016, 01:51:23 PM »

Will see what they have to say. I never got my stove to hot I kept my nitrates right on the money. Sent in my water samples every 6 months. 

26

RidgeWood Stoves, defunct, support only / Re: Cracks

« on: May 01, 2016, 01:46:38 PM »

Here's a few Pic's. I called Ridgewood and left a message.

27

RidgeWood Stoves, defunct, support only / Re: Cracks

« on: April 30, 2016, 09:59:31 AM »

Just got done cleaning my 6000 after shutdown and found cracks on both side of the door on the lower corners. Both about a good 3 inches long.

28

RidgeWood Stoves, defunct, support only / Re: Thinking about shutting down for the year

« on: March 14, 2016, 05:17:56 AM »

I burn a load of cardboard first and the scrape the hell out of the inside and clean it out with my shop vac and give a good coat of pb blaster. Don't forget to sweep out the stack. oven cleaner takes everything off on the outside real easy. I might drain and flush my system this year too.

29

Fire Wood / Re: Not impressed with Husqvarna 732

« on: December 27, 2015, 10:10:40 AM »

stihl is #1

30

RidgeWood Stoves, defunct, support only / Re: plugged stove

« on: December 15, 2015, 06:02:53 AM »

I burn some cardboard  every 2 to 3 weeks.