Welcome, Guest. Please login or register.
Did you miss your activation email?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
16
Shaver Furnace / Re: first time user
« on: November 16, 2014, 08:08:38 AM »
Chris,
That should stay in there on it own! I guess you can wedge a tapered piece of wood in the mouth of the thermowell to hold it!
Greg Steinacher
618-401-0726
www.midwestoutdoorfurnace.com
That should stay in there on it own! I guess you can wedge a tapered piece of wood in the mouth of the thermowell to hold it!
Greg Steinacher
618-401-0726
www.midwestoutdoorfurnace.com
17
Shaver Furnace / Re: Shaver Fire Box
« on: November 16, 2014, 08:04:37 AM »
Coach,
I would cut the air flow at the fan, do you have an auto damper? If so lift the auto flap and tape part of the air intake off, this will cut your air flow. If not enough, tape off more!
Greg Steinacher
618-401-0726
www.midwestoutdoorfurnace.com
I would cut the air flow at the fan, do you have an auto damper? If so lift the auto flap and tape part of the air intake off, this will cut your air flow. If not enough, tape off more!
Greg Steinacher
618-401-0726
www.midwestoutdoorfurnace.com
18
Shaver Furnace / Re: knocking noise
« on: November 16, 2014, 07:38:24 AM »
Are you heating to higher temps. then before the upgrades?
Greg Steinacher
618-401-0726
Greg Steinacher
618-401-0726
20
General Outdoor Furnace Discussion / Re: Temperature control
« on: November 11, 2014, 08:47:12 PM »21
Shaver Furnace / Re: Website?
« on: November 02, 2014, 04:06:15 PM »
Woodbutcher,
The site you are referring to is not Billy Shavers site either.
If you go to that site it refers to Randy or Ben. Randy is in Wisconsin and Ben, North Carolina!
Greg Steinacher
The site you are referring to is not Billy Shavers site either.
If you go to that site it refers to Randy or Ben. Randy is in Wisconsin and Ben, North Carolina!
Greg Steinacher
22
Shaver Furnace / Re: Website?
« on: November 02, 2014, 03:59:31 PM »
To all,
That dealer is a guy named Randy, not a very nice person. He used to say he was the National Sales Rep. for Shaver. He misrepresented his self in my opinion, he was, and is just a Dealer.
He gets folks to the site through Shaver, then talks Shaver down and tries to sell them a Nature's Comfort.
He still sells the Shaver forced air units, I guess and the Top Loaders too. The Web site is conceiving, to say the least.
Kind of bait and switch!
The site was not Billy Shavers site, just a dealer site.
Billy's Shaver Web Site is http://shaver-furnaces.com/
Greg Steinacher
618-401-0726
My web: www.midwestoutdoorfurnace.com
That dealer is a guy named Randy, not a very nice person. He used to say he was the National Sales Rep. for Shaver. He misrepresented his self in my opinion, he was, and is just a Dealer.
He gets folks to the site through Shaver, then talks Shaver down and tries to sell them a Nature's Comfort.
He still sells the Shaver forced air units, I guess and the Top Loaders too. The Web site is conceiving, to say the least.
Kind of bait and switch!
The site was not Billy Shavers site, just a dealer site.
Billy's Shaver Web Site is http://shaver-furnaces.com/
Greg Steinacher
618-401-0726
My web: www.midwestoutdoorfurnace.com
23
General Outdoor Furnace Discussion / Re: Which pump setting?
« on: November 02, 2014, 03:04:17 PM »
24
General Outdoor Furnace Discussion / Re: My hardy blower...
« on: October 29, 2014, 02:48:00 PM »
I am sure they are not supposed to backdraft out the air supply. The way it looks there are several of them doing just that.
Greg Steinacher
Greg Steinacher
25
General Outdoor Furnace Discussion / Re: My hardy blower...
« on: October 29, 2014, 01:14:10 PM »
To all,
How is creosote building up on the fan blades. Are the furnaces back drafting?
Greg Steinacher
618-401-0726
www.midwestoutdoorfurnace.com
How is creosote building up on the fan blades. Are the furnaces back drafting?
Greg Steinacher
618-401-0726
www.midwestoutdoorfurnace.com
26
General Outdoor Furnace Discussion / Re: what size heat exchanger
« on: October 14, 2014, 12:40:30 PM »
Flash,
Your just wanting to heat the 900 sq. ft? A 12 x 18 is 90,000 btu at 180 degree water! Where are you located? If it is well insulated you should be able to heat that with 20 to 30,000 btu's!
Greg Steinacher
618-401-0726
Your just wanting to heat the 900 sq. ft? A 12 x 18 is 90,000 btu at 180 degree water! Where are you located? If it is well insulated you should be able to heat that with 20 to 30,000 btu's!
Greg Steinacher
618-401-0726
27
General Outdoor Furnace Discussion / Re: Shaver 165
« on: October 11, 2014, 01:06:19 PM »
Chris,
Run the pump on high speed! Is this filter your putting in the system a Y strainer? An actual filter could reduce the
circulation in your system and not be good!
Greg Steinacher
Run the pump on high speed! Is this filter your putting in the system a Y strainer? An actual filter could reduce the
circulation in your system and not be good!
Greg Steinacher
28
General Outdoor Furnace Discussion / Re: Shaver 165
« on: October 09, 2014, 09:07:44 PM »
Chris,
I would be glad to help with your install, but I must ask who is your Dealer? Do you have a install manual? What treatment was
recommended when you bought the furnace?
Greg Steinacher
618-401-0726
www.midwestoutdoorfurnace.com
I would be glad to help with your install, but I must ask who is your Dealer? Do you have a install manual? What treatment was
recommended when you bought the furnace?
Greg Steinacher
618-401-0726
www.midwestoutdoorfurnace.com
29
General Outdoor Furnace Discussion / Re: Sabotage at Fryburg fair!!!!!!
« on: October 06, 2014, 07:44:28 PM »
Slim,
It looks like a stem out of some sort of pipe? LMAO
Greg Steinacher
It looks like a stem out of some sort of pipe? LMAO
Greg Steinacher
30
General Outdoor Furnace Discussion / Re: Sharkbite guages
« on: October 02, 2014, 10:07:15 AM »
Airforce,
These are pressure gauges that you are siting, an open system will not show much pressure I would not think. The temp. gauges are a lot higher. The 1" is around $40.00!
Greg Steinacher
618-401-0726
www.midwestoutdoorfurnace.com
These are pressure gauges that you are siting, an open system will not show much pressure I would not think. The temp. gauges are a lot higher. The 1" is around $40.00!
Greg Steinacher
618-401-0726
www.midwestoutdoorfurnace.com