Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: aquastat location  (Read 3251 times)

CRJR

  • Full Member
  • ***
  • Offline Offline
  • Posts: 105
    • View Profile
aquastat location
« on: September 13, 2012, 06:05:30 PM »
i am building a new stove but i am unshure on aquastat and high limit well location front, back, top, bottom? if it makes any differance it is a p&m ml series design slightly modified. does it make any differance on location? any info would be helpfull
Logged

RSI

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3100
  • OWF Brand: HeatMaster
  • OWF Model: G200 and B250
    • View Profile
    • RSI
Re: aquastat location
« Reply #1 on: September 14, 2012, 09:29:16 AM »
Front of back shouldn't matter but you want it up high but low enough that is will never be out of the water if it gets low or boils over.
Logged

CRJR

  • Full Member
  • ***
  • Offline Offline
  • Posts: 105
    • View Profile
Re: aquastat location
« Reply #2 on: September 17, 2012, 05:45:45 PM »
Any thoughts on how much distance to keep between the aquastat/ high limit well and the fire box . I also have exhaust heat exchanger going through the water jacket also. Hopefully I'm just over thinking this
Logged

peacmar

  • Full Member
  • ***
  • Offline Offline
  • Posts: 109
    • View Profile
Re: aquastat location
« Reply #3 on: September 26, 2012, 09:45:42 PM »
My experience has shown that nearest to the hot water outlet as possible to be the best location. It seems to make for the most usable and reliable settings. If you have a high limit cut out to prevent boiling over then near the top as possible but give at least 3 inches space from the top to keep an accurate reading as the water level fluctuates.
Logged

CRJR

  • Full Member
  • ***
  • Offline Offline
  • Posts: 105
    • View Profile
Re: aquastat location
« Reply #4 on: September 30, 2012, 11:30:40 AM »
Here are some pictures hopefully they post so you can see what I am working with

[attachment deleted by admin]
Logged

CRJR

  • Full Member
  • ***
  • Offline Offline
  • Posts: 105
    • View Profile
Re: aquastat location
« Reply #5 on: September 30, 2012, 11:50:18 AM »
Here are some pictures of the inner workings

[attachment deleted by admin]
Logged