Outdoor Wood Furnace Info

All-Purpose OWF Discussions => General Outdoor Furnace Discussion => Topic started by: wormmister on October 22, 2013, 06:03:10 PM

Title: Plans
Post by: wormmister on October 22, 2013, 06:03:10 PM

Hi all
I'm thinking of building a owf and I'm looking for a good set of plans.
Any ideas or help would be great.
Thank you

Title: Re: Plans
Post by: slimjim on October 22, 2013, 06:07:17 PM

What are you looking to build, a tank in a tank or a superstove?

Title: Re: Plans
Post by: WoodMOJoe on October 23, 2013, 08:11:11 AM

I have some ACAD drawings of the tank-in-tank stove I built here:

http://outdoorwoodfurnaceinfo.com/forum/index.php?topic=3693.0 (http://outdoorwoodfurnaceinfo.com/forum/index.php?topic=3693.0)

That might give you some ideas for building that type.  Check out the Homemade section for others, lots of great info there.

Title: Re: Plans
Post by: wormmister on October 23, 2013, 08:16:26 PM

What's a superstove ?

Title: Re: Plans
Post by: slimjim on October 24, 2013, 04:53:52 AM

A superstove is a well designed stove that burns clean enough that you could pass EPA phase 2 and harness as much of that heat as possible going up the stack, all the while make it easy to clean,We have one that you are welcome to copy or just take some Ideas from it is called the Optimizer 250, what I would do is get literature from all the manufacturers and pit each against the other on the ideas and take the best to incorparate those ideas into your stove, not going to be easy but it would be a great project.