I have batteries, that took care of my problem. I just didn't understand. The way that i read how to hook the second thermostat up was jumper wire for both R (blue wire) and RC (red wire, 24vac) from thermostat 1 to thermostat 2. Green wire removed from thermostat one and put in W hole in thermostat 2. this was a no go for me, no fan. After taking jumper off of R and using supplied little metal jumper from R to RC i have a fan when second thermostat calls for heat. So thankful for the quick replies. I have two identical honeywell thermostats model number RTH111B1016 they do not have the option C some refer too. Hopefully this will help some poor sucker like me one day. Thanks again to those that replied over night to help me.
So this is how i understand my second thermostat now, power comes in on RC is jumped to R using supplied metal jumper that came with honeywell thermostat. When heat is called for power goes from R to W, done by thermostat automatically controlling the fan in my oil furnace that i hope doesn't burn any more oil.