Print

[TheBoiler]

I just posted in another threads that had a link to a CB Video where they were claiming near 100%

EN 303-5 is the European Standard. About 90% would be the efficiency.

[boyland]

Just keep in mind anything over 83% efficient will produce condensation.

Ask anyone over this will you need a heated drain for their product to get rid of the water it is going to produce.

Funny thing about thermal transfer does not matter the fuel it condensates after this point.  This is why 90% furnaces in a home need to drain into the drain not outside otherwise you will have a really nice ice mountain to deal with.

The E3 has very pretty good efficiency just under the 83% mark based upon the same standard every other furnace is rated on the some EN standard.

It will be released very soon.

[johnybcold]

Not bad maybe I will sell my CB for one once they hit 150%

[Scott7m]

You can get it higher than 83%.   There are a lot of variables once you go past that but I've seen them run fine at 89% efficiency.  I feel that's the high limit though, you could go higher but you'd have to develop a whole new chimney system that condensation couldn't affect

Just keep in mind anything over 83% efficient will produce condensation.

Ask anyone over this will you need a heated drain for their product to get rid of the water it is going to produce.

Funny thing about thermal transfer does not matter the fuel it condensates after this point.  This is why 90% furnaces in a home need to drain into the drain not outside otherwise you will have a really nice ice mountain to deal with.

The E3 has very pretty good efficiency just under the 83% mark based upon the same standard every other furnace is rated on the some EN standard.

It will be released very soon.

[boyland]

still going to have to have a drain.

[boyland]

E4 Production Ready.

Check out the website for more details.

[Bull]

Better than that, I am going to your factory in Lebanon in the morning and check them out.

[Bull]

I went to where they make the Wood Boiler this morning and saw there new gasser that was just epa approved. Very nice looking unit. Dan, (the guy that showed me around) was very nice and answered all my questions. If the price is what he thinks it is this will be the best priced unit that I have checked on.