Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - MD20/20

Pages: 1 ... 7 8 [9] 10 11
121
Natures Comfort / Re: Draft Fan Opening
« on: March 03, 2012, 05:21:28 PM »
I may try that next season.

122
Natures Comfort / Re: WATER TESTING
« on: March 03, 2012, 05:07:01 PM »
how is it gray now as compared to before? 

123
Electronics / Re: Pump failure after pump failure
« on: March 02, 2012, 06:00:54 AM »
no problems with pump, did have a drip from threaded pipe which shorted out the blower.  all good now.  It was good to take it apart on a warm day;  if it was cold, I would have been whining.

124
Electronics / Re: Pump failure after pump failure
« on: March 01, 2012, 08:28:17 PM »
it says 4148, but at checkout it is $198.

126
Electronics / Re: Pump failure after pump failure
« on: March 01, 2012, 07:57:37 PM »
200 bucks on their site.  how much is a better pump?

127
Electronics / Re: Pump failure after pump failure
« on: March 01, 2012, 07:44:33 PM »
which pump is on the nc250?

128
General Outdoor Furnace Discussion / chunks blowing out the chimney
« on: February 29, 2012, 10:51:48 AM »
I'm seeing 1/8 to 1/4" pieces of what I imagine is dried creosote on my owb roof from time to time.  Is it just creosote blowing out when the boiler fires up?  Is it a problem?

129
Equipment / Re: Wood Holder
« on: February 28, 2012, 02:48:08 PM »
do you use all the features or do you have the Timber-jack"

130
General Outdoor Furnace Discussion / Re: moisture in ash pan
« on: February 25, 2012, 07:40:51 PM »
ok...thanks.

131
General Outdoor Furnace Discussion / moisture in ash pan
« on: February 25, 2012, 06:25:01 PM »
Seem to have moisture in the front part of my ash pan.  Any ideas why?  thx

132
General Outdoor Furnace Discussion / Re: Oil furnace won't stop coming on
« on: February 25, 2012, 09:26:07 AM »
How is it working many years later?  I have a similar set-up.

133
Shaver Furnace / Re: Failed tests?
« on: February 23, 2012, 08:43:04 PM »
and the rest....?

134
Natures Comfort / Re: Draft Fan Opening
« on: February 22, 2012, 08:55:58 AM »
good idea on the hardware cloth, and you're right about the green wood burning fast.  What's your differential set at on the aqua stat?

135
Natures Comfort / Re: Draft Fan Opening
« on: February 21, 2012, 11:24:02 AM »
No I didn't get it.  Thanks--any suggestions on the best way, or just "seal 'er up"?

Pages: 1 ... 7 8 [9] 10 11