Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - slimjim

Pages: [1] 2 3 ... 354
1
Plumbing / Re: Flat plate and sidearm water heater heat exchangers
« on: February 09, 2020, 07:53:30 AM »
Can you by any chance, turn it 90 degrees, they should be mounted vertically for cleaning and draining purposes.

2
Plumbing / Re: Flat plate and sidearm water heater heat exchangers
« on: January 30, 2020, 01:29:41 AM »
I use mono flo tees but if you space regulars away from each other to promote flow, they will work.

3
DIY remodeling with Hydronics / Re: Copper tubing for wall heat?
« on: January 27, 2020, 08:13:25 AM »
How about a nice ornate cast iron radiator then?

4
DIY remodeling with Hydronics / Re: Copper tubing for wall heat?
« on: January 26, 2020, 02:36:30 PM »
I gather Marty that you don’t want to give up any space?

5
DIY remodeling with Hydronics / Re: Copper tubing for wall heat?
« on: January 25, 2020, 01:53:41 PM »
Here’s a thought Marty, years ago I made some towel racks for a bathroom in an old house out of copper, it warmed the room as well as the towels, I know, it’s your bedroom but putting tomorrow’s clothes on it tonight warms them up nice for tommorow morning!

6
Plumbing / Re: Flat plate and sidearm water heater heat exchangers
« on: January 25, 2020, 03:47:12 AM »
Maybe when I come down we can visit your friend as well?

7
HeatMaster / Re: G400 Metal deterioration
« on: January 25, 2020, 03:45:57 AM »
No

8
Plumbing / Re: Flat plate and sidearm water heater heat exchangers
« on: January 24, 2020, 02:44:44 PM »
Can you make shine?

9
Plumbing / Re: Flat plate and sidearm water heater heat exchangers
« on: January 24, 2020, 11:03:04 AM »
I would like to vacation in that area once, meet the locals, learn how to make good shine.

10
Plumbing / Re: Flat plate and sidearm water heater heat exchangers
« on: January 24, 2020, 07:26:23 AM »
Badger Pipe has 30 plates with  inch ports. For some reason I thought you already moved after I dropped off your pipe years ago.

11
Plumbing / Re: Flat plate and sidearm water heater heat exchangers
« on: January 24, 2020, 06:27:07 AM »
130-140 degree water is pretty darn hot and with the plate exchanger they will never run out.

12
Plumbing / Re: Flat plate and sidearm water heater heat exchangers
« on: January 24, 2020, 03:22:56 AM »
Juddspaintballs, so you sold the place in the mountains? I liked that location, Where did you go from there?

13
Plumbing / Re: Flat plate and sidearm water heater heat exchangers
« on: January 24, 2020, 03:20:57 AM »
RSI is right on the head pressure, typically when I set them up I use a 30 plate and use a mono flow tee in the wood boiler loop for better flow.

14
HeatMaster / Re: G400 Metal deterioration
« on: January 24, 2020, 02:08:56 AM »
Well well well, it seems that now he finally is being taken seriously by HeatMaster and they have made an offer but it’s a shame that he had to go to this extent huh?

15
Plumbing / Re: Flat plate and sidearm water heater heat exchangers
« on: January 23, 2020, 02:07:53 PM »
Depending on the tank, it’s worth mentioning that preheating the tank to those temps you might overheat the tank and need to reset the breaker when you decide to shut down your boiler! Better to go ahead and install the mixing valve and set it at 140

Pages: [1] 2 3 ... 354