Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - atvalaska

Pages: 1 ... 36 37 [38] 39
556
I have my boiler in a "walk in freezer"   I would like to have a hood over the door on a switch ..so I could turn on a fan...open the firebox and no smoke rollin in my room/shed  any ideas pics /links would be great...    like this on page 36                                                                 www.aqua-therm.com/aquatherm_manual_010109.pdf

557
Plumbing / Re: my themo pex install ...so far
« on: July 28, 2014, 09:58:45 AM »
it's a azz kicker to bend   imo   just peeling it is no fun.....

558
thanks seen that ....will hunt up a 90deg

559
Plumbing / fittings for my 1 1/4 thermo pex /to manifold hook up
« on: July 17, 2014, 03:06:47 PM »
will I got the piping into the building ,now I need to mount it to some uni-a-strut ... ...now here's my ? ......  I need a fitting on my 1 1/4 pipe   r&s lines to hook into a EPM from upnor    looks like i'll have to neck it down to 1" to hook it to the manifold...I've been using " pex supply" ....any ideas? 

560
Plumbing / my themo pex install ...so far
« on: July 02, 2014, 02:59:49 PM »
I off and running!!   install in progress!  1st pic is of 5' of peeled pipe ...so I can insert it into my 6" abs pipe that I have under the slab and stubbed up into the inside slab> I also placed a hard plastic line in between them so once i'm done I can "add spray foam and seal the line from the inside to the out side !  ;)       2nd pic is oF the black mean snake laying in the yard :-X ..waiting to fight with me !    3rd pic ..Is just a shot  looking  down> "the white foam surrounding my shop" pipe to enter under footing is under it ....(slab on grade)   4thpic>   it my thermo pex INSIDE a 6" pipe ..the flex stuff u buy in a coil  at the big orange " home death spot" (THD)...I ran some 10/3 wire along with it ...more to come as I plan to box in the pipe ...like a T with two  legs   insulation on both side and a board of it across the top

564
here we go ...

565
how's about .gov shut thehell up and leave us alone???????? :D

566
General Outdoor Furnace Discussion / Re: My Setup
« on: March 14, 2014, 07:51:18 PM »
when u going to drop that trailer off at my place ???  .... I know people with ....outside odb's... running with temps 30 below 24/ 7  for weeks

567
  .Gov is out of control...imo ....and imo  adds up as faster than the  dead democrat voter count !...which is dammm high !!

568
Plumbing / Re: Uponor (Wirsbo) ProPEX versus ViegaPEX PureFlow Crimp
« on: March 04, 2014, 10:50:57 PM »
buy the m12 /ebay etc /pex supply.......and never look back..........

569
90 something a cord for oak!!! dammm ...look at this ad I just hunted up in my area >>>> aka pine  >>>>DRY!! 16" SPLIT Spruce delivered also have 24" birch DRY!! CALL// 322-55** $350 per cord...........

570
why would u change the boiler brand out for a different one?  I helped put a A-T in a buddys house in 91/92....still going strong today ...just sayin.

Pages: 1 ... 36 37 [38] 39