Outdoor Wood Furnace Info
Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => Heatmor => Topic started by: lindnova on May 21, 2014, 11:35:53 AM
-
I just cleaned out the Heatmor 200 yesterday and the grates are really getting warped. They have been slowly getting worse. Now they are about 1 to 2 inches lower in the middle and cracking.
At what point should they be replaced? Anyone else dealing with this?
-
I had this issue years ago. First what I was doing wrong was not keeping ash box cleaned out.
And ground pipes got water next to them. Not that this is your issue. This was my findings it was a
Spendy lesson. I have a 1996 model. ::)
Heat550