Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: unbending logster  (Read 2468 times)

pops69

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 30
    • View Profile
unbending logster
« on: September 19, 2014, 05:47:08 PM »
Does anyone know how to"unbend logster"? I have a trench, Logster in the trench, but going thru the foundation its bent, I don't know if I can get my Link seals to fully seal with the bend pressure coming thru the wall.
Thanks
Logged

Jwood

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1065
  • OWF Brand: P&M Ultimizer
  • OWF Model: Bl 28-40
    • View Profile
Re: unbending logster
« Reply #1 on: September 19, 2014, 07:10:07 PM »
Do what you have to do to go straight through the wall.
Logged
North Central Minnesota
Stihl MS 270c
Stihl MS 461
Blacked out Fiskars X27
06' Silverado 2500HD Duramax

coolidge

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1409
    • View Profile
Re: unbending logster
« Reply #2 on: September 20, 2014, 08:43:44 AM »
Ahhh.  That stuff must be a B!:ch to deal with in the cooler weather, I unrolled mine on one of those HOT. Days and let it bake in the sun a few weeks. Warm it up if possible.
Logged
Western Maine

atvalaska

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1281
  • OWF Brand: aqua-therm
  • OWF Model: coal one 275
  • 907, no vacancy !
    • View Profile
Re: unbending logster
« Reply #3 on: September 23, 2014, 03:09:55 PM »
we used a weed burner to  get ours ..happy
Logged

hoardac

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 321
  • OWF Brand: Heatmaster G-200
  • OWF Model: Formerly Wooddoctor
    • View Profile
Re: unbending logster
« Reply #4 on: October 04, 2014, 08:26:35 PM »
I tied mine to my 4 wheeler and a tree pulled it tight, let it sit for a week in the sun, helped quite a bit.
Logged

Pinehouse4

  • Full Member
  • ***
  • Offline Offline
  • Posts: 119
  • OWF Brand: Portage and Main
  • OWF Model: BL 34/44
  • .
    • View Profile
Re: unbending logster
« Reply #5 on: October 27, 2014, 06:49:18 PM »
I don't know if this will help you with your particular problem but I was able to make it a little bit easier to work with by running straight hot water via a hose over the section required. Give it 10 minutes of maximum hot water and then be prepared to work it with gloves.

Bob
Logged
Stihl 028
Stihl 046
Wallenstien 820 wood processor
JD 6300 4 WD loader, blade, blower, forks,
BL 34/44 working great.

treeeman00

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 27
  • OWF Brand: Heatmaster
  • OWF Model: MF5000E
    • View Profile
Re: unbending logster
« Reply #6 on: October 27, 2014, 07:29:07 PM »
I did mine by myself in 30-40 degree weather.  I stood the roll upright in the trench and got the end started through the hole in my wall using a crowbar then unrolled.
Logged