Welcome, Guest. Please login or register.
Did you miss your activation email?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
61
Central Boiler / Re: FireStar XP Module
« on: January 01, 2015, 05:07:19 PM »
I bought there wire they had I needed it,as for power it has a small transformer to power it up like plugging in a cell phone to charge ,n you just us the white n black wire n wire the plug according to instructions very simple!,any trouble hooking it up to wifi call CB and ask for Tyler in it he's great he will set you up and he loves his job great guy!
62
Central Boiler / Re: Pulse setting
« on: December 28, 2014, 03:08:53 PM »
The e-classics have it on the firestar 2
63
Central Boiler / Re: Direct piping cl6048
« on: December 16, 2014, 06:54:32 AM »
That's why I say everyone setup is different,my old oil burner boiler in house,that's clean.like I said earler my outside boiler is above grade I have a guage on the inlet side reads 9 psi so there more than that at the oil burner WE ARE ALL ON HERE TO HELP EACH OTHER NOT TO PUT THEM DOWN IF ITS NOT WHAT THEY HAVE LETS JUST HELP EACH,IF THERES A REASONS WHY NOT TO OR HOW TO DO SOMETHING SAY IT,BUT IF ITS NOT GOOD FOR YOU DOESNT ALWAYS MEAN IT NOT GOOD FOR SOMEONE ELSE THANKS. GREAT PEOPLE WITH LOTS OF SMARTS HERE THANKS
64
Central Boiler / Re: Direct piping cl6048
« on: December 16, 2014, 04:46:31 AM »
You guys sound like I dreamed this up Sunshine tree my dealer look over my hook up EVERYONES IS DIFFERENT with the elevation of my wood boiler said perfect for direct! Do t u think he would of like
d to sell me the HX ? What u really need to talk about is exposing to atmosphere did u add corrosion additive and TESTING THE QUALITY OF WATER!!!!! put a piece of steel wool in Masson jar full to top no air n see what it looks like in a day or two! Direct is fine depends on your setup! By the way I did ALL OF THE WORK PLUMBING THE WHOLE JOB NOT JUST SITTING HERE TALKING about what someone did for me!
d to sell me the HX ? What u really need to talk about is exposing to atmosphere did u add corrosion additive and TESTING THE QUALITY OF WATER!!!!! put a piece of steel wool in Masson jar full to top no air n see what it looks like in a day or two! Direct is fine depends on your setup! By the way I did ALL OF THE WORK PLUMBING THE WHOLE JOB NOT JUST SITTING HERE TALKING about what someone did for me!
65
Central Boiler / Re: E-Classic 1400 Fan not working properly
« on: December 15, 2014, 04:15:54 PM »
Maybe you should ohm out the selinoids if I remember they should be between 15-30 ohms with wires all unplugged to ALL of them power OFF,not sure what the fan ohms should be but it could be acting up,but does sound like it's the firestar but check selinoids before you could burn up the new firestar also.
66
Central Boiler / Re: Direct piping cl6048
« on: December 15, 2014, 01:17:02 PM »
My circulating pump runs constant to upstairs coil this for me is the. Best way so when house calls for heat upstairs the blower doesn't have to wait for boiler to heat the coil it takes time sometime that zone will not run all day due to downstairs heat rising upstairs everyone's set up is different mine works flawless it will. Vapor lock if pump starts n stop that's why the little 007 runs constant for all that water to cool off in attic could freeze if not run
67
Central Boiler / Re: Pulse setting
« on: December 15, 2014, 10:42:36 AM »
I added on to my 1850 farmhouse about 1500sq' insulated both but old side just 3/4 foam outside so not sure all living space total but say maybe 2000' domestic hot water running since nov when I got it going maybe less then 1/2 cord for sure,working perfect with 15 min pulse with 95% locust.im on a burn cycle of at least 1 hour to 1 1/2 hour between cycles
68
Central Boiler / Re: Direct piping cl6048
« on: December 15, 2014, 10:36:26 AM »
My wood boiler is above the grade equal to the middle of my first n second floor so I have 9psi of pressure at my oil burner that's why I went that way n my house system I put anti-freeze cryo teck in the system 18 yrs ago n water u would of drank it if you didmt know better,clean,what r the draw backs of direct plumb,my system has the thermostat valve that shuts under 150* plus I installed valves to isolate the two?
69
Central Boiler / Re: Pulse setting
« on: December 14, 2014, 04:39:15 PM »
Well running 15 min pulse cycles and working great,burn cycles are about every hour to hour and a half,everyone's heat load is different,good coal bed never went out since,put 5-6 pieces of wood in which is like 1/3 or less in firebox and runs over 12hs between loads with a burn time in 4-5 hr times and plenty of wood left for say 2-3 hrs.
70
Central Boiler / Re: Great central boiler called
« on: December 14, 2014, 04:33:02 PM »
Nice good luck hook it it the best way,good pex in the ground etc! I love the e-classic little more maintaince but no smoke and very little wood useage! Heated with one in basement to judge the wood and smoke for 18 years.
71
Central Boiler / Re: Great central boiler called
« on: December 12, 2014, 06:38:26 AM »
Well what did you buy?
72
Central Boiler / Re: E2300 - First Timer
« on: December 11, 2014, 02:29:55 PM »
Sounds good always learning,don't really let it switch over someone's always here but still a good idea will instal one day
73
Central Boiler / Re: E2300 - First Timer
« on: December 11, 2014, 09:05:48 AM »
That sounds good with aqua stat maybe do that one day
Guess a strap on one would work so not to break system open
Guess a strap on one would work so not to break system open
74
Central Boiler / Re: E2300 - First Timer
« on: December 10, 2014, 05:53:51 PM »
You set oil at like a 150 so it will heat the house if fire out or u gone away to long,plus CB doesn't want the boiler to get cold n hot back n forth not good for condensation in firebox
75
Central Boiler / Re: E2300 - First Timer
« on: December 10, 2014, 12:18:26 PM »
There is a thermostat. Valve on the loop from outside if temp goes under 150 it shuts n circulates just the outside so oil inside is not trying to heat that