Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:
Pages: [1] 2

Author Topic: Home Electrical Question  (Read 4843 times)

Roger2561

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1780
  • OWF Brand: Central Boiler
  • OWF Model: Classic Edge 550 HD
    • View Profile
Home Electrical Question
« on: January 08, 2020, 02:16:30 PM »

Hi all - My home is a 1930'sish post and beam style home.  In the living room and dining room the ceiling beams are exposed.  There's approx. 4 inches of foam insulation between the beams leaving about 4 inches of the beam surface exposed.  Presently the only way to have light in the living room is with 2 small tables lamps.  When I am hosting a gathering I like to have more light in the living room but I'm unable to do so due to only having 2 small tables lamps.  Anyone know how I can attach lights to the ceiling/beams without it looking too gaudy and out of place?  I'd like to have any surface mounted raceway blend in with the color of the beams.  Your suggestions are most welcome.  Thanks.  Roger 
Logged
CB Classic Edge 550 HD
JD Tractor 4500 4X4 with front-end loader
JD LX277AWS
Stihl 021
Stihl MS 311
Cud Cadet 27 Ton Wood splitter
2012 Honda Goldwing GL1800
New Hampshire

hondaracer2oo4

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1471
  • OWF Brand: Heatmaster. Past Hardy
  • OWF Model: G200. Past H4
    • View Profile
Re: Home Electrical Question
« Reply #1 on: January 10, 2020, 07:50:10 AM »

Got a picture of the beam in question?
Logged

juddspaintballs

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
    • View Profile
Re: Home Electrical Question
« Reply #2 on: January 10, 2020, 07:58:04 AM »

Wall mounted sconces?
Logged

hoardac

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 321
  • OWF Brand: Heatmaster G-200
  • OWF Model: Formerly Wooddoctor
    • View Profile
Re: Home Electrical Question
« Reply #3 on: January 10, 2020, 06:54:32 PM »

You can make wood covers for your beams with a similar wood then hide your wire behind that, they make slim electrical box to minimize the depth you need. Or you could use some 12 volt led and just use a bottom board on the beam with slim lights mounted into that board they make all kinds of shapes and sizes.
Logged

artbaldoni

  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
  • OWF Brand: Nature's Comfort
  • OWF Model: NCB-175 Modified to burn coal and/or wood.
  • Continuously burning since 2010!
    • View Profile
Re: Home Electrical Question
« Reply #4 on: January 11, 2020, 05:03:14 AM »

LED Remote Driver 12v lighting. Easy to blend in small gauge wire runs at your beams.
Logged
Nature's Comfort  NCB-175
Dolmar 5105 20"
Makita DCS6401 28"
1995 5/8 ton Dodge
7 x 14 10k Trailer
Bobcat 7753 w/EEL Tracks
22T Huskee Splitter
Fiskars X-27
Fiskars X-11
15 # Monster Maul
Titan 60"  Twin Cyl. Root Grapple

mlappin

  • Fabricator Extraordinaire
  • Global Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4140
  • OWF Brand: homebuilt, now HeatmasterSS
  • OWF Model: Martin Steel Works Gen 1 then, now a G200.
  • North Liberty, Indiana
    • View Profile
    • Altheatsolutions
Re: Home Electrical Question
« Reply #5 on: January 11, 2020, 10:36:15 AM »

I have a friend that’s done a lot of remodeling on older homes. He has taken a router, routed a groove in the beam then cut a slim piece of wood to glue in over the top of the romex, its noticeable of course but not near as much as trying to hide wire. He’s also trimmed over the beams and cut a groove in the back of the trim for the wire.
Logged
Stihl 023
Stihl 362
Stihl 460
Sachs Dolmar 112 and 120
Homemade skid steer mounted splitter, 30" throat, 5" cylinder
Wood-Eze model 8100 firewood processor

HeatmasterSS dealer for Northern Indiana

Roger2561

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1780
  • OWF Brand: Central Boiler
  • OWF Model: Classic Edge 550 HD
    • View Profile
Re: Home Electrical Question
« Reply #6 on: January 11, 2020, 11:36:36 AM »

I hope the pic comes through to give you an idea what my ceiling looks like.  Keep in mind those beams are as old as the house and hard as granite.   
« Last Edit: January 11, 2020, 11:39:52 AM by Roger2561 »
Logged
CB Classic Edge 550 HD
JD Tractor 4500 4X4 with front-end loader
JD LX277AWS
Stihl 021
Stihl MS 311
Cud Cadet 27 Ton Wood splitter
2012 Honda Goldwing GL1800
New Hampshire

slimjim

  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • OWF Brand: Wood Doctor / HeatMaster
  • OWF Model: 14,000. / G 200 and G 400
  • Southern Maine
    • View Profile
    • www.mainlycustom.com
Re: Home Electrical Question
« Reply #7 on: January 11, 2020, 12:47:51 PM »

Do you have access to the beams from above and drill down through them?
Logged
Wood boiler sales, service and installation for the Northeastern USA.

Roger2561

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1780
  • OWF Brand: Central Boiler
  • OWF Model: Classic Edge 550 HD
    • View Profile
Re: Home Electrical Question
« Reply #8 on: January 11, 2020, 05:15:24 PM »

Do you have access to the beams from above and drill down through them?
Slimjim - Unfortunately I do not.  There's an apartment up there and I doubt if my tenant would like it if drilled through their floor.  :)  But, man, that would be so easy to do if I did have access.

Logged
CB Classic Edge 550 HD
JD Tractor 4500 4X4 with front-end loader
JD LX277AWS
Stihl 021
Stihl MS 311
Cud Cadet 27 Ton Wood splitter
2012 Honda Goldwing GL1800
New Hampshire

hondaracer2oo4

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1471
  • OWF Brand: Heatmaster. Past Hardy
  • OWF Model: G200. Past H4
    • View Profile
Re: Home Electrical Question
« Reply #9 on: January 13, 2020, 07:19:47 AM »

What are those trim pieces on each side of the beams? Ontop of the ceiling drywall.
Logged

Roger2561

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1780
  • OWF Brand: Central Boiler
  • OWF Model: Classic Edge 550 HD
    • View Profile
Re: Home Electrical Question
« Reply #10 on: January 13, 2020, 08:29:58 AM »

What are those trim pieces on each side of the beams? Ontop of the ceiling drywall.

Handaracer2004 - Those piece are only for show and to cover the seams that are present between the drywall and beams.  I got lazy and didn't want to take the time fill the seam with compound. 
Logged
CB Classic Edge 550 HD
JD Tractor 4500 4X4 with front-end loader
JD LX277AWS
Stihl 021
Stihl MS 311
Cud Cadet 27 Ton Wood splitter
2012 Honda Goldwing GL1800
New Hampshire

RSI

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3100
  • OWF Brand: HeatMaster
  • OWF Model: G200 and B250
    • View Profile
    • RSI
Re: Home Electrical Question
« Reply #11 on: January 13, 2020, 07:26:00 PM »

What about running LED tape on the sides of the beams? You could put a small molding under it if you don't want to see the leds.
Here is what I am talking about. https://www.ledsupply.com/12v-flexible-led-strips
There is similar products on ebay for a lot cheaper but I am not sure how good those are.
Logged

hondaracer2oo4

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1471
  • OWF Brand: Heatmaster. Past Hardy
  • OWF Model: G200. Past H4
    • View Profile
Re: Home Electrical Question
« Reply #12 on: January 13, 2020, 08:24:40 PM »

Can you peel that off, run some bx cable in that pocket, drill a 3/4 hole in the beam up above the height of where that molding covers and the. A corresponding 3/4 hole vertical up into the beam to bring the power down to a light fixture?
Logged

Roger2561

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1780
  • OWF Brand: Central Boiler
  • OWF Model: Classic Edge 550 HD
    • View Profile
Re: Home Electrical Question
« Reply #13 on: January 14, 2020, 03:01:07 AM »

RSI - That's similar to what artbaldoni suggested and it appears to be the simplest solution to the problem.  Only, instead of attaching it to the side of the beams (I'm trying to keep them as authentic as possible) I think I'll stick them to the trim pieces that run parallel to the beams. 

Marty - I had thought of using a router but I didn't want to do anything to deface the surface of the beams.

Hondaracer2004 - I've been trying to steer away from using BX or Romex due to the difficulty of trying to drill the holes through the beams without destroying the dry wall.  I may have to but I hope I don't.

Thanks everyone for the suggestions.  I'll give this project a bit more thought and see what I can come up with.

Roger   
Logged
CB Classic Edge 550 HD
JD Tractor 4500 4X4 with front-end loader
JD LX277AWS
Stihl 021
Stihl MS 311
Cud Cadet 27 Ton Wood splitter
2012 Honda Goldwing GL1800
New Hampshire

artbaldoni

  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
  • OWF Brand: Nature's Comfort
  • OWF Model: NCB-175 Modified to burn coal and/or wood.
  • Continuously burning since 2010!
    • View Profile
Re: Home Electrical Question
« Reply #14 on: January 14, 2020, 06:01:01 AM »

Logged
Nature's Comfort  NCB-175
Dolmar 5105 20"
Makita DCS6401 28"
1995 5/8 ton Dodge
7 x 14 10k Trailer
Bobcat 7753 w/EEL Tracks
22T Huskee Splitter
Fiskars X-27
Fiskars X-11
15 # Monster Maul
Titan 60"  Twin Cyl. Root Grapple
Pages: [1] 2