Picked up a moisture meter on line, made a fresh cut in some of the dead or dying ash I've already dropped, a few are 25% most are around 20%.
Can you have wood get too dry for use in a gassifier?
My thinking is this, get em cut too length now and thru the next couple of months, then later in the summer when it isn't so hectic get split and stacked.
I have maybe another 6-8 in the one section of woods that will be inaccessible once the corn is planted, I've been dragging them up to the drainage ditch then using the grapple to maneuver one end over the ditch so I can grab em from the other side, that side is accessible always. I've also marked the wettest few I've found to be cut up first.