Print

[akahle]

I am currently running a pretty standard set up into my existing forced air furnace. I have a 700 square foot camp connected to the front of my house that is currently not regularly heated. I am thinking about hooking up a couple runs of baseboard radiators to the return side of my system. I would split the return line, and place a pump inline to the radiators. I would tie a thermostat to that pump and place it in the camp. My question is whether or not this sounds like a good idea. I realize I will have colder water going to the stove.

[slimjim]

Could you post for us a drawing?

[akahle]

Here is a drawing

[RSI]

That looks like it should work. Use a pump with internal flow check if you have the connections that far apart.

[slimjim]

RSI is right on the spacing, can you get the tees close together, less than 6 inches apart?

[akahle]

I should be able to run the t's as close as needed. Thank you for your help.

[slimjim]

As you have the drawing, that heat loop will want to ghost flow, if you truly want to control your heat then keep the tees within 6 inches of each other.