With my e-classic 1400 came; a hoe for scraping the firebox of creosote and for other chores, a poker to move the firewood around, and a wonder bar to loosen from the walls any creosote build up, 1 gallon of corrosion inhibitor and pre-installed pump.
Purchases; 70 feet of thermopex pipe, various connectors, nipples, ball valves and 35 feet of pex tubing from thermopex to finally installation site.
Homemade; a device to scrape the heat exchanger of dust build up (it is a piece of aluminum 1/4"x1"x4" connected to a 6ft piece of threaded rod), a screwdriver bent at 90 degrees to clear air holes of creosote and ash (once a week cleaning). Considering the of use a torch to burn the creosote buildup from the air holes...Gotta think about this a bit more before I do it.
Items found on the farm; a shovel to clean the reaction chamber of ash and dust, a rake to smooth out the hot coals prior to loading firewood.